User's Manual

VIDEO
To record Video, verify the camera in Video mode.
To start recording:
Press the Video Button. The camera will emit one beep and the camera light will
flash while recording.
To stop recording:
Press the Video Button again. The camera will emit one beep and the camera light
will stop flashing while recording.
• Do not make any unauthorized alterations to the camera. Doing so may
compromise safety, regulatory compliance, performance, and may void the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate or paint the camera or battery. Do not insert foreign objects
into the battery opening on the camera. Do not use the camera or the battery if it
has been damaged - for example, if cracked, punctured or harmed by water.
Disassembling or puncturing the battery can cause an explosion or fire.
REMOTE
Splashproof only, not waterproof.
PHOTO
To capture a photo, verify the camera in Photo mode.
To take a photo:
Press the Photo Button. The camera will emit a camera shutter sound.
Attach your camera to helmets, gear and equipment.
MOUNTING YOUR CAMERA
Photo Button
Video Button
19 20