Installation Guide

BEFORE YOU BEGIN
 Please read these instructions carefully to familiarize yourself with the re-
quired tools, materials, and installation instructions. Follow the sections that
pertain to your particular installation. Doing so will help you avoid costly
mistakes. In addition to proper installation, please read all operating and
safety instructions.
 Please provide adequate space for the bath unit in accordance with the
rough-in. Arrange the location of the drain in advance.
 These instructions contain important care, cleaning, and warranty infor-
mation.
COMPLIANCE INFORMATION
 AKDY Imports LLC only provides the bathtub. It is the buyer's or installer's
responsibility to know if it complies with local state, city, and regulatory
laws. It is the also the responsibility of the buyer or installer to ensure that
the waste drain is made watertight with silicone sealant or caulking com-
pound.
SAFETY
 Please use all necessary safety precautions when using the bathtub.
 Bathtub may become slippery when wet and increase risk of fall or injury.
 Use of handrails or handicap accommodations is highly recommended for
seniors or those with disabilities.
 Ensure small children are supervised when using the tub to prevent risk of
drowning or injury.
 Pets should not be left within the tub without proper supervision.
 Under no circumstances is the manufacturer liable for bodily harm or injury
stemming from accidental falls or misuse of our bathtub.
MAINTENANCE
 Most dirt will simply wash off with mild soap and water.
 For spots and stains, we recommend using liquid dish washing soap or
nonchlorine bleach.
CAUTION: Do not use any industrial strength cleaners or solvents to
clean the bathtub surface. Damage to the surface will occur.
 Use calcium remover to only clean chrome surfaces.
CAUTION: Avoid getting calcium remover on the bathtub surface.
REPAIR
 For Minor Scratches & Dulling: Use liquid polishing compound suitable for
acrylic.
 For Deep Scratches or Burns: Use very fine sandpaper (at least 1500 grit)
in a circular motion covering a wider area greater than the scratch. Always
wet the sandpaper with water before sanding. Repeat until the scratch is
eliminated. Finally, polish the area with polishing compound to bring back
its original shine. Use a soft cloth and a small amount of polish to buff the
surface. Repeat as needed.