Use and Care Manual

Use and Care Guide
MAINTENANCE
Most dirt will simply wash off with mild soap and water.
For spots and stains, we recommend using liquid dish washing soap or nonchlorine bleach.
CAUTION: Do not use any industrial strength cleaners or solvents to clean the bathtub surface. Damage to the surface will
occur.
Use calcium remover to only clean chrome surfaces.
CAUTION: Avoid getting calcium remover on the bathtub surface.
REPAIR
For Minor Scratches & Dulling: Use liquid polishing compound suitable for acrylic.
For Deep Scratches or Burns: Use very fine sandpaper (at least 1500 grit) in a circular motion covering a wider area greater than
the scratch. Always wet the sandpaper with water before sanding. Repeat until the scratch is eliminated. Finally, polish the area
with polishing compound to bring back its original shine. Use a soft cloth and a small amount of polish to buff the surface. Repeat
as needed.

Summary of content (1 pages)