Installation Guide

Cleaning and Maintenance
Warning: To avoid electric shock always unplug your wine cooler before
cleaning. Ignoring this warning may result in death or injury.
Caution: Before using cleaning products, always read and follow manufac-
turer’s instructions and warnings to avoid personal injury or product damage.
General: Prepare a cleaning solution of 3-4 tablespoons of baking soda
mixed with warm water. Use sponge or soft cloth, dampened with the cleaning
solution, to wipe down your wine cooler. Rinse with clean warm water and dry
with a soft cloth. Do not use harsh chemicals, abrasives, ammonia, chlorine
bleach, concentrated detergents, solvents or metal scouring pads. Some of
these chemicals may cause damage and/or discolor your wine cooler.
Clean the interior surface with lukewarm water using a soft cloth.
Place your wine cooler on floor strong enough to support the wine cooler when
it is fully loaded. To level your wine cooler, adjust the front legs at the bottom of
the wine cooler.
Keep away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may in-
crease electrical consumption. Extreme cold or hot ambient temperatures may
also cause the wine coolers not to perform properly.
Not designed for placement in attic or basement. Designed for use inside
homes.
Power Interruptions
Occasionally there may be power interruptions due to thunderstorms or other
causes. Remove the power cord from AC outlet when a power outage occurs.
When power has been restored, replug power cord to AC outlet.
Vacation and Moving Care
For long vacations or absences, unplug the unit, empty contents from wine
cooler, and clean the wine cooler and door gaskets according to "General
Cleaning" section. Prop doors open, so air can circulate inside. When moving,
always move the wine cooler vertically. Do not move the unit lying on its side.
Wine Cooler Care & Cleaning