Installation Sheet

GUIDELINES
FOR UNIT
INSTALLATION
Page 6
After Sales Service
718 Mid-Atlantic Parkway
Martinsburg, WV 25401
Phone: [phone] • 304-263-2525
Fax: [phone]
www.maax.com
© AKER Plastics Company Inc., 2007 0703 10023045
Aker Plastics Company Inc. (hereafter "Aker") offers the following express limited warranty on each of its products. This warranty extends only to the
original owner/end-user for personal household use. For commercial uses, additional limitations apply.
Aker warrants acrylic units to be free from defects in workmanship and materials under normal use and service for a period of ten (10) years from the
initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer.
Aker warrants fiberglass units to be free from defects in workmanship and materials under normal use and service for a period of three (3) years from
the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer.
Any product reported to the authorized dealer or to Aker as being defective within the warranty period will be repaired or replaced (with a product of
equal value) at the option of Aker. In no event will Aker be liable for the cost of repair or replacement of any installation materials, including but not
limited to, tiles, marble, etc. This warranty extends to the original owner/end-user and is not transferable to a subsequent owner.
Neither the distributor, authorized Aker dealer nor any other person has been authorized to make any affirmation, representation or warranty other than
those contained in this warranty; any affirmation, representation or warranty other than those contained in this warranty shall not be enforceable against
Aker or any other person.
Aker reserves the right to modify this warranty at any time, it being understood that such modification will not alter the warranty conditions applicable
at the time of the sale of the products in question.
Limitations
This warranty shall not apply following incorrect operating procedures, breakage or damages caused by fault, carelessness, abuse, misuse,
misapplication, improper maintenance, alteration or modification of the unit, as well as chemical or natural corrosion, accident, fire, flood, act of God
or any other casualty. This warranty shall not apply to stain or malfunction caused by ferrous water, hard water or salty water.
The owner/end-user of the product covered by this warranty is entirely responsible for its proper installation and electrical wiring. Aker neither installs
nor supervises the installation, nor hires a contractor for this purpose, and consequently cannot be held responsible for any defect, breakage or damage
caused thereby or resulting thereof, either directly or indirectly. The owner/end-user must provide access to the components of the product as described
in the installation guide, so that Aker can execute the warranty specified herein.
If such access is not available, all expenses to provide said access will be the responsibility of the owner/end-user.
This warranty does not apply to products or equipment not installed or operated in accordance with instructions supplied by Aker and all applicable
rules, regulations and legislation pertaining to such installations.
Aker strongly recommends that its products-for example, but without limitation, shower doors and other items-be installed by professionals with
experience in bathroom products. Installation of shower doors by an inexperienced person may result in glass breakage and, consequently, cause
personal injury or death.
Aker is not liable for any costs, damages or claims resulting from the purchase of products that do not fit through openings or existing structures. Aker
is not liable for any costs, damages or claims resulting from defects that could have been discovered, repaired or avoided by inspection and testing
prior to installation.
Aker is not liable for personal injuries or death to any person or for any direct, special, incidental or consequential damage, loss of time, loss of profits,
inconvenience, incidental expenses, labor or material charges, or any other costs resulting from the use of the product or equipment or pertaining to
the application of the present warranty, or resulting from the removal or replacement of any product or element or part covered by this warranty.
EXCEPT AS OTHERWISE PROVIDED ABOVE, AKER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR COMPLIANCE WITH ANY CODE.
In any case, Aker cannot be liable for any amount over and above the purchase price paid for the product by the owner/end-user, contractor or builder.
Commercial Limitations
In addition to the above conditions and limitations, the warranty period for products installed for commercial applications or used in commercial ventures
is of one (1) year from the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer. Aker is not responsible for
loss of use or profit under any circumstances.
If the product is used as a display, Aker standard warranty applies and the warranty period begins when the product is placed on display. This warranty
gives the owner/end-user specific legal rights. The owner/end-user may also have other rights which vary from one state and/or province to another.
Warranty service
In order to obtain service provided under this warranty during regular business hours, contact the dealer or distributor who sold the unit, or Aker directly.
Aker will provide the warranty service described above when the following conditions have been met: (1) the failure is of the nature or type covered by
the warranty; (2) the user has informed an authorized Aker Agent or Warranty Service Department representative of the nature of the problem during
the warranty period; (3) conclusive evidence (e.g., proof of purchase or installation) is provided to the foregoing by the user proving that the failure
occurred or was discovered within the warranty period; and (4) an authorized independent service person or company representative has been
permitted to inspect the product during regular business hours within a reasonable time after the problem was reported by the user.
Aker's warranty obligation shall be discharged upon tender of replacement or repair. The purchaser refusal to accept the tender terminates Aker's
warranty obligation.
MAAX products are certified by one or more of the following certification agencies: UL, IAPMO, CSA, ULI, INTERTEK / WARNOCK HERSEY.
Certain models are pending certification approval. Certification may be ended by MAAX or certification agencies without notice.
AKER is a registered trademark of AKER PLASTICS COMPANY Inc.
MAAX is a registered trademark of MAAX Canada Inc.
LIMITED WARRANTY