User's Manual

Variant 2.
MANUAL BC8518 No. 928754-000 USA
Version: A0 Approved by: HH
Page 3 (12)
TRANSMITTER ON
Pull out the stop button and the transmitter is switched on. The
operation indicator lamp (ACC.) starts blinking and the transmitter
is on.
ELECTRONIC LOCK
If the operating indication LED is red, the electronic lock is
activated. Contact the works manager or see the Installations
manual.
MAIN CONTACTOR ON
Then the transmitter is on, press the signal button and this actuates
the Main Contactor in the receiver, and it is ready for operation.
NORMAL RUN
The transmitter is designed with two pushbuttons for HOIST
Up / Down, two for BRIDGE Forward / Backward and two for
TROLLEY Left / Right. Each button is divided into 2 steps
(a perceptible resistance) which facilitates the running at a certain
speed. The first speed is obtained when the pushbutton is half
compressed and the second speed is obtained when the pushbutton is
totally compressed.
All the motions can be run simultaneously and the motions stop
when the pushbutton is released, otherwise make an EMERGENCY
STOP.
MANUAL BC8518 No. 928754-000 USA
Version: A0 Approved by: HH
Page 4 (12)