User's Manual

PRODUCT DESCRIPTION REMOTUS CU9600 92 3159-980 Rev. F Page 12(16)
Datum: 02.10.24
780 45 BJÖRBO, TEL. + 46 241 25 000, TELEFAX. [phone]
3.3 Indications
Observe! If it is two cpu:s the indications are double.
On CPU-board:
Normal indications:
1. System error.
2. Error in the communikation between CPU:A and CPU:B.
3. Indication of reception error. Lit after 400 ms when no valid message is received.
4. Indicating address error (ID). Wrong ID received.
5. Indicating correct received message. ”Message OK”.
6. Indicating drift-mode. Lights when MC is activated.
7. Indicating Watchdog-timer. It should always flash.
Fatal error indications:
1 and 3 lit: Ram error.
1 and 4 lit: Flash Eprom error.
On radio-board:
1. Indicating of radiosignal (squelch). Better than -90 dBm.
3. Indicating + 5V is ok on the board.
4. Indicating channel 1.
5. Indicating message to the transmitter (duplex).
6. Indicating channel 2.
On Profibus-board:
One led indicating communication with the fieldbus. It should lit at operation.
7:Sys error
5:Rec. Error
3:Korr. msg
1:WDT
2:Com. error
6:ID error
4:Mode
1:SYS ERR
3:REC. ERR
5:MSG OK
7:WDT
2:COM. ERR
4:ID ERR
6:DRIFT
1:SQ
3:+ 5V
5:Tx
4:CH 1
6:CH 2