User's Manual

MANUAL MC9700 Del. no.
Ver. A0 Approved by:
Sheet 3 (10)
TRANSMITTER ON
Pull out the stop button (EMERGENCY STOP) and the transmitter
will make a self-test during 0,5 seconds. The operation indicator lamp
starts blinking and the transmitter is on.
MAIN CONTACTOR ON
Then the transmitter is on press the signal button and this actuates the
Main Contactor in the receiver and the traverse is ready for operation.
NORMAL RUN
The transmitter is designed with two manipulators:
One for Bridge/Trolley travel and the other for Hoist motions, each
direction being divided into 2 steps (a perceptible resistance)
facilitating run at a certain speed. The size and direction of the
manipulators deflections are equal to the speed and direction of the
objects motions. Two motions can be run simultaneously in the same
manipulator. The motions stop when the manipulator is brought to
neutral, otherwise push the STOP.