User's Manual

MANUAL MC9700 Del. no.
Ver. A0 Approved by:
Sheet 4 (10)
MICRO RUN
(NOT SIMULTANEOUS)
Set the selector for MICRO/NORMAL in position MICRO. The
micro-run movements are only at lowest speed in micro-run mode
irrespective of the deflections of the manipulator. The other functions
are working just as in ordinary runs. The manipulated movements are
looped so that only one movement can be operated at a time.
SIGNAL
A signal can be emitted at any time during the run and is obtained as
long as the push button switch is depressed.
STOP
Depress the STOP button for STOP.