User's Manual

MANUAL MC9700 Del. no.
Ver. A0 Approved by:
Sheet 5 (10)
AUTOMATIC SWITCH- OFF
FUNCTION
The transmitter is equipped with automatic switch-off function,
switching off the transmitter after 2, 5, or 15 minutes. After the latest
use, depending on what period of time has been looped, it is also
possible to loop for continuous drive. The indicator lamp for operation
goes out and the Main Contactor is de-energized. For renewed
activation of the Main contactor restart is required, press the stop
button and pull it out again, and push the signal button. Battery
voltage below 5,4 V also causes automatic switch-off.
TRANSMITTER OFF
MAIN CONTACTOR OFF
Depress the STOP button which switches off the transmitter. At the
same time the Main Contactor is deactivated (the Main Contactor of
the traverse cuts out). The operation indicator lamp goes out.