User's Manual

MANUAL MC9700 Del. no.
Ver. A0 Approved by:
Sheet 6 (10)
TRANSMITTER LED INDICATIONS
If the transmitter under start up or under drift detect a fault in any self
tests it will indicates with a continuously red light. After what the
transmitter closed down. If it indicates continuously yellow light when
you start up the transmitter it will be something fault with some of the
manipulators.
INDICATIONS EXPLANATIONS
Green flashing Drift
Yellow flashing Battery voltage low < 5,9 V
Yellow continuously Discharge battery voltage < 5,4 V
Red continuously Fault, see the service manual
RUN DOWN BATTERY
The transmitter is equipped with an indicator lamp (green and yellow)
for battery status. The lamp blinks green when the battery voltage is
normal (=6V), but starts to blink yellow when it falls (<5,9V). When
the indicator lamp has started blinking yellow the transmitter can be
operated, but the battery will be changed, before the voltage is so low
(<5,4V) that the transmitter switches off automatically. This is
indicated by the indicator lamp showing fixed yellow light.
The two last-mentioned statuses are also present at outlets in the
receiver.