User's Manual

MANUAL MC9700 Del. no.
Ver. A0 Approved by:
Sheet 9 (10)
9. If you loose control of the crane movements, release the
pushbuttons to obtain the zero position in order to stop the
crane. If still it does not stop, actuate the STOP function.
10. Find out where the crane's main power disconnected is in
order to be able to quickly switch off if required.
11. Never hand over the transmitter to anybody who has not
undergone training in radio-control crane operation.
12. After completed operation you should always switch the
transmitter off with STOP. Note! Do never put the transmitter
aside without switching the transmitter off with STOP.
13. The main contactor of the crane is to be switched off after
end of working hours. The transmitter is then to be kept
inaccessible to unauthorized persons.
14. In case of faults or breakdowns in the radio control
equipment the crane should permit operating from the cab or
with suspended operating gear. In such case first turn the
switch from radio operation to manual operation. Make
certain how this switch-over is to be made before you start
driving any individual crane.
15. Make sure that the receiver can not be activated when you
service the transmitter.
ALWAYS REPORT DEFECTS AND DEFICIENCIES TO
THE WORK MANAGEMENT.
!
!
!
!
!
!
!