User's Instructions
Table Of Contents
- 1 Allgemeines
- 2 Lieferumfang
- 3 Sicherheit und Umwelt
- 4 Konformitätserklärung
- 5 Gerätebeschreibung
- 5.1 Allgemeine Beschreibung
- 5.2 Funktionen des externen MUTE‑Schalters (optional)
- 5.3 Technische Daten
- 5.4 DSR800: Beschreibung der Bedienelemente
- 5.5 DSR800: Beschreibung der Displayelemente
- 5.6 DPT800: Beschreibung der Bedienelemente
- 5.7 DPT800: Beschreibung der Displayelemente
- 5.8 DHT800: Beschreibung der Bedienelemente
- 5.9 DHT800: Beschreibung der Displayelemente
- 6 Inbetriebnahme
- 7 QUICK SETUP
- 8 Bedienungshinweise
- 9 Bedienelemente am Empfänger
- 10 Display des Empfängers
- 11 Display der Sender
- 12 Menüstruktur des Empfängers
- 13 Menüstruktur der Sender
- 14 Funktionsbeschreibung
- 15 Wartung und Reinigung
- 16 Fehlerbehebung
- 17 DMS800: Bedienelemente
- 1 General
- 2 Package content
- 3 Safety and environment
- 4 Declaration of Conformity
- 5 Equipment description
- 5.1 General description
- 5.2 Functions of the external MUTE switch (optional)
- 5.3 Technical data
- 5.4 DSR800: Description of the controls
- 5.5 DSR800: Description of the display elements
- 5.6 DPT800: Description of the controls
- 5.7 DPT800: Description of the display elements
- 5.8 DHT800: Description of the controls
- 5.9 DHT800: Description of the display elements
- 6 Commissioning
- 7 QUICK SETUP
- 8 Operating instructions
- 9 Controls on the receiver
- 10 Display of the receiver
- 11 Display of the transmitter
- 12 Menu structure of the receiver
- 13 Menu structure of the transmitter
- 14 Functional description
- 15 Maintenance and cleaning
- 16 Troubleshooting
- 17 DMS800: Controls
- 1 Généralités
- 2 Livraison
- 3 Sécurité et environnement
- 4 Déclaration de conformité
- 5 Description de l'appareil
- 5.1 Présentation générale
- 5.2 Fonctions du bouton MUTE externe (en option)
- 5.3 Caractéristiques techniques
- 5.4 DSR800 : Description des commandes
- 5.5 DSR800 : Description des éléments de l'afficheur
- 5.6 DPT800 : Description des commandes
- 5.7 DPT800 : Description des éléments de l'afficheur
- 5.8 DHT800 : Description des commandes
- 5.9 DHT800 : Description des éléments de l'afficheur
- 6 Mise en service
- 7 QUICK SETUP
- 8 Conseils de manipulation
- 9 Commandes du récepteur
- 10 Afficheur du récepteur
- 11 Afficheur de l'émetteur
- 12 Structure des menus du récepteur
- 13 Structure des menus de l'émetteur
- 14 Description du fonctionnement
- 15 Maintenance et nettoyage
- 16 Résolution des erreurs
- 17 DMS800 : Commandes
- 1 Generalidades
- 2 Volumen de suministro
- 3 Seguridad y medio ambiente
- 4 Declaración de conformidad
- 5 Descripción del equipo
- 5.1 Descripción general
- 5.2 Funciones del interruptor MUTE externo (opcional)
- 5.3 Datos técnicos
- 5.4 DSR800: Descripción de los controles
- 5.5 DSR800: Descripción de los elementos de pantalla
- 5.6 DPT800: Descripción de los controles
- 5.7 DPT800: Descripción de los elementos de pantalla
- 5.8 DHT800: Descripción de los controles
- 5.9 DHT800: Descripción de los elementos de pantalla
- 6 Puesta en servicio
- 7 QUICK SETUP
- 8 Instrucciones de manejo
- 9 Controles del receptor
- 10 Pantalla del receptor
- 11 Pantalla de los transmisores
- 12 Estructura de menús del receptor
- 13 Estructura de menús de los transmisores
- 14 Descripción de funciones
- 15 Mantenimiento y limpieza
- 16 Subsanación de errores
- 17 DMS800: Controles
FUNCTIONAL DESCRIPTION
DMS800 MANUAL
108
Submenu Function
REHEARSAL Sound check
Check HF level of the transmitter in the action area
The maximum recording time is four minutes
UTILITY STATUS Activateopticalwarningfunctionforspeciccritical
operating conditions
If one of these operating conditions occurs, the
light ring around the SELECT wheel on the receiver
changes from green to red and a corresponding
status display is shown on the display.
The light ring changes to red and the display shows a
large warning for 5 seconds. A small warning remains
on the display until the warning is cleared by pressing
the SELECT wheel.
The warning messages appear in order of urgency.
The selected warning functions are active in LOCK
mode and in ACTIVE mode.
COUNTRY Selecting the country
A country must be selected when switching on the
receiverforthersttime.
DISPLAY MODE Change the appearance of the display
The following display modes are available
MAIN
FREQUENCY
NAME GROUP/CHANNEL
DISPLAY
CONTRAST
Modify the contrast of the display to the current
lighting conditions