User's Manual

4 Installation and Connection

4.2.2 Installation

and Connection

Note:

1. Use the supplied PS 3 F-Lock panel mount socket to

install the Installation Module in a tabletop or an op-

tional SA 60 stand adapter to mount the Installation

Module on a floor or table stand.

• For even better vibrational noise rejection, you can fix

the Installation Module to the tabletop with an op-

tional H 500 (see fig. 14) or H 600 + A 608 shock

mount (see figs. 15 and 16).

2. Use a shielded cable to connect the Installation Mod-

ule to a microphone input with phantom power.

3. If the phantom power on your mixing console is

switchable, switch the phantom power on. (Refer to

the instruction manual for your mixing console.)

The Capsule Module and the LED ring will be pow-

ered from the phantom supply.

DISCREET ACOUSTICS modular

4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 31