User's Manual

4 Installation and Connection

Important:

Fig. 8: Aligning the

microphone.

Refer to fig. 8.

4.8.1 Steadying

the microphone

4. Fix the cable in place with electrician's tape.

• Do not tie a knot into the cable to hang it on the

hook.

5. Hold the cable with one hand and turn the micro-

phone carefully into the desired position.

• To activate the bass cut, refer to Section 4.3.2.

• To power the LED

ring from an external

source,

refer to Section 4.5.1.

To keep the microphone steady even in a draft,

1. Stretch a suitable length of fishing line horizontally

across the room, passing the fishing line through the

eye on the HM 1000.

2. Fix the fishing line to two opposite walls so as to cre-

ate just enough downward pull to steady the micro-

phone laterally.

DISCREET ACOUSTICS modular

4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 37