Owners Manual

MICROLITE MANUAL 79
HEAdWORN MICROPHONES
6.2.1 Wire-mesh grill
Fig. 29: WM81
Wire-mesh grill for EC81 MD
Fig. 30: WM82
Wire-mesh grill for EC82 MD
The supplied wire‑mesh grill (WM81, WM82) consists of several
layers of different materials.
The wire‑mesh grill is used as protection against dirt and make‑up.
Additionally, the wire‑mesh grill protects the microphone membra‑
ne from wind and pop noise.
6.2.2 Cable clip
The cable clip is used to fasten the cable to the article of clothing,
which relieves stress on the microphone cable.
Fig. 31: H3 Cable clip
The microphone is attached to the housing by the clasp on the clip:
This helps ensure the microphone cable is protected.
6.2.3 Wind screen
Fig. 32: W81
Wind screen for EC81 MD
Fig. 33: W82
Wind screen for EC82 MD
Wire-mesh
grill
Cable clip
Wind screen