Operating instructions

11
SPECIFICATIONS
Mic/Line Input
Type: Electronically balanced and RF filtered
Impedance: Greater than 2.5K, any gain setting
Input Gain Settings: 0dB, +30dB, +50dB
EIN, 20-20KHz: –126dBu (+50dB gain)
Maximum Input Level: +20dBu at 0dB gain
–10dBu at +30dB gain
-30dBu at +50dB gain
Tone Controls: Shelving controls
Turnover frequency 1kHz
+/– 10dB at 100 Hz;
+/– 10dB at 10 kHz
Main Out
Impedance: 200 Ohms balanced; 100 Ohms unbalanced
Max output level: +26dBu, 10k load
Direct Outputs
Impedance: 100 Ohms, unbalanced
Max output level: +20dBu, 10k load
Remote Level Control Range: 6dB/Volt from 0 to 5V, plus off
Serial Communication (RS-232): 9600 baud, 8 data bits, no parity, 1 stop bit
Compressor/Leveller
Threshold: –40dBu to 0dBu
Maximum Gain Reduction: 25dB (10dB leveling, 15dB compression)
Maximum System Gain
Input to Main Out: 82dB
System THD: Less than 0.1%, any gain setting
(+10dBu out)
System IMD: Less than 0.1%, any gain setting
(+10dBu out)
Phantom Power: +15V, switch selectable per channel
Power Consumption: 10 Watts max at 20VAC
Weight: 3 lbs, 4 ozs
Dimensions: 19"wide x 1.75"high x 8"deep
Specifications subject to change without notice.
This product meets the CE Compliance Standards - EN55022 and EN50082-1:1998.