Datasheet

ManualsBrandsAKG ManualsAV receiversAVR 135/230

REMOTE CONTROL FUNCTIONS 11

Remote Control Functions

OSD Button: Press this button to activate

the On Screen Display (OSD) system used to set

up or adjust the AVR’s parameters.

Dolby Mode Selector: This button is used

to select one of the available Dolby Surround

processing modes. Each press of this button will

select one of the Dolby Pro Logic II modes, Dolby

3 Stereo or Dolby Digital. Note that the Dolby

Digital mode is only available with a digital input

selected and the other modes only as long as a

Dolby Digital source is not playing . See page 23

for the available Dolby surround mode options.

DTS Digital Mode Selector: When a DTS

source is in use the AVR will select the appropri-

ate mode automatically and no other mode will

be available. Pressing this button will display the

mode currently selected by the AVR´s decoder,

depending on the surround material played and

the speaker setting.

Logic 7 Selector: Press this button to

select one of the available Logic 7 surround

modes. (See page 23-24 for the available Logic 7

options).

Transport Buttons: These buttons do not

have any functions for the AVR, but they may be

programmed for the forward/reverse play opera-

tion of a wide variety of CD or DVD players, and

audio or video- cassette recorders. (See page 35

for more information on programming the

remote.)

Dim Button: Press this button to activate

the Dimmer function, which reduces the bright-

ness of the front panel display, or turn it off

entirely. The first press of the button shows the

default state, which is full brightness by indicat-

ing

DIMMER FULL in the Main

Information Display

. Press the button

again within five seconds to reduce the bright-

ness by 50%, as indicated by

DIMMER

HALF

. Press the button again within five sec-

onds and the main display will go completely

dark. Note that this setting is temporary; the dis-

play will always return to full brightness when

the AVR is turned on. In addition,both the

Power Indicator

and the blue accent light-

ing inside the volume control will always remain

at full brightness regardless of the setting. This is

to remind you that the AVR is still turned on.



Skip Up/Down Buttons: These buttons

do not have a direct function with the AVR, but

when used with a compatibly programmed CD

or DVD changer they will change the tracks on

the disc currently being played in the changer.



Stereo Mode Selector: Press this button

to select a stereo playback mode. When the but-

ton is pressed so that

DSP SURR OFF

appears in the Main Information Display

the AVR will operate in a bypass mode with true

fully analog, two-channel left/right stereo mode

with no surround processing or bass manage-

ment as opposed to other modes where digital

processing is used. When the button is pressed

so that

SURROUND OFF appears in the

Main Information Display

, you may enjoy

a two-channel presentation of the sound along

with the benefits of bass management. When

the button is pressed so that

5 CH STEREO

appears, the stereo signal is routed to all five

speakers, if installed. (See page 20 for more

information on stereo playback modes).



DTS Neo:6 Mode Selector: Pressing this

selector button cycles the AVR through the

various DTS Neo:6 modes, which extract a five-

or seven-channel surround field from two-chan-

nel program material (from PCM source or ana-

log input signal). The first press selects the last

DTS Neo:6 surround mode that was in use, and

each subsequent press selects the next mode.

Macro Buttons: Press these buttons

to store or recall a “Macro”, which is a

pre-programmed sequence of commands

stored in the remote. (See page 36 for more

information on storing and recalling macros.)

RDS Select Button: Press this button to

display the various messages that are part of the

RDS data system of the AVR’s tuner. (See page 33

for more information on RDS).

Preset Up/Down: When the tuner is in

use, press these buttons to scroll through the

stations programmed into the AVR ’s memory.

When CD or DVD is selected using the Input

Selector button

, these buttons may func-

tion as Slow Fwd/Rev (DVD) or ”+10” (CD).

Clear Button: Press this button to clear

incorrect entries when using the remote to

directly enter a radio station’s frequency.

Memory Button: Press this button to enter

a radio station into the AVR ’s preset memory. Two

underline indicators will flash at the right side of

the Main Information Display

, you then

have five seconds to enter a preset memory

location using the Numeric Keys

. (See

page 33 for more information.)

Delay/Prev Ch.: Press this button to begin

the process for setting the delay times used by

the AVR when processing surround sound. After

pressing this button, the delay times are entered

by pressing the Set button

and then using

the

⁄

buttons

to change the setting.

Press the Set button again to complete the

process. (See page 20 for more information.)

›

Button: This button does not have a

function with the AVR. When a DVD player or TV

is selected, it may be used to navigate the menus

of those devices.

Speaker Select: Press this button to

begin the process of configuring the AVR’s Bass

Management System for use with the type of

speakers used in your system. Once the button

has been pressed, use the

⁄

buttons

select the channel you wish to set up. Press the

Set button

and then select the speaker

type (see page 16 for more information.)

(

Mute: Press this button to momentarily

silence the AVR or TV set being controlled,

depending on which device has been selected.

When the AVR remote is being programmed to

operate another device, this button is pressed

with the Input Selector button

to begin

the programming process. (See page 35 for more

information on programming the remote.)

NOTE: As any of the remote buttons pressed is

active with the device selected, the correspon-

ding Selector button

will briefly flash

red to confirm your selection.

)

Volume Up/Down: Press these buttons to

raise or lower the system volume.

Spare Button: This button does not have

any function for the operation of the AVR, but it

is available for use when programmed with the

code from another remote. (See page 35).

TV/Video Button: This button does not

have a direct function on the AVR, but when

used with a compatibly programmed VCR, DVD

or satellite receiver that has a “TV/Video” func-

tion, pressing this button will switch between

the output of the player or receiver and the

external video input to that player. Consult the

Owner’s Manual for your specific player or

receiver for the details of how it implements this

function.