Owners Manual

C414 XLS / C414 XLII MANUAL
46
TecHNIcAL dATA
6 Technical data
Type: 1‑inch large diaphragm pressure gradient microphone
Palar patterns: 9, selectable
Open‑circuit sensitivity: 23 mV/Pa (‑33 dBV ± 0.5 dB)
Frequency range: 20 to 20,000 Hz (see frequency response graphs)
Impedance: ≤200ohms
Recommended load impedance: ≥2200ohms
Basscutlterslope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Preattenuation Pads: ‑6 dB, ‑12 dB, ‑18 dB (selectable)
Equivalent noise level to IEC 60268‑4: 20 dB (0 dB preattenuation)
Equivalent noise level to IEC 60268‑4
(A‑weighted):
6 dB(A) (0 dB preattenuation)
Signal/noise ratio re 1 Pa (A‑weighted): 88 dB
Max. SPL for 0.5% THD: 200/400/800/1600 Pa
140/146/152/158 dB SPL
(0/‑6/‑12/‑18 dB preattenuation)
Dynamic range (A‑weighted): 134 dB min.
Max. output level (A‑weighted): 5 V rms (+14 dBV) (+14 dBV)
Environment: temperature: ‑10°C to +60°C
R. H.: 95% (+20°C), 85% (+60°C)
Powering: 48 V phantom power to IEC 61938
Current consumption: approx. 4.5 mA
Connector: IEC standard 3‑pin XLR
Dimensions: 50 x 38 x 160 mm / 2.1 x 1.7 x 6.3 in.
Net weight: 300 g / 10.2 oz.
Patents: Electrostatic transducer (patents nos. AT 395.225, DE 4.103.784,
JP 2.815.488, US 7,356,151)
This product conforms to the standards listed in the Declaration of Conformity. You can request the Declaration of Conformity
by e‑mail from [e-mail].