Instruction Manual

6 Specifications
Type: condenser microphone (self-polarized)
Polar pattern: omnidirectional (hemispherical)
Frequency response: 20 Hz to 20 kHz (installed in very large boundary)
Sensitivity at 1000 Hz: 20 mV/Pa (-33 dBV) re 1 V/Pa (measured on 1.5 x 1.5 m
boundary)
Max. sound pressure level for 1% THD: 130 dB SPL
Equivalent noise level to IEC 60268-4 (A-weighted): 16 dB(A)
S/N ratio re 1 Pa (A-weighted): 78 dB
Electrical impedance: ≤ 600 ohms
Recommended load impedance: ≥ 2000 ohms
Powering: 9 to 52 V phantom power to IEC 61938
Current consumption: approx. 2 mA
Connector: phantom power adapter with integrated male 3-pin XLR
connector
Size: 0.8 dia. x 0.12 (1.1) in. (20 dia. x 3 (28) mm)
Net weight: approx. 1.1 oz. (30 g) (without cable)
This product conforms to the standards listed in the related Declaration of Conformity. To order a free copy of the Declaration
of Conformity for this product, visit http://www.akg.com or contact [e-mail].
Frequency Response Polar Diagram
Dimensioned Drawing
17
C 562 CM