Instruction manual

Table Of Contents
Strata CTX General Description 10/04 vii
Introduction
This General Description provides an overview of the Strata CTX28, CTX100-S, CTX100 and
CTX670 digital business telephone systems, associated hardware and features.
Note The features described in this document assume that the Strata CTX system has the current
software release installed. At the time of printing, Strata CTX R2.2 and CTX WinAdmin
R2.20 are the most current versions.
Important! The Strata CTX100-S uses the same hardware and configuration as the Strata
CTX100, with a few exceptions. Whenever the CTX100 is mentioned in this book, it
applies to both the CTX100-S and CTX100, unless specified otherwise.
Organization
This document is divided into the following major topics:
Chapter 1 – Strata CTX28 Overview describes the system, its basic capacities and system
expansion.
Chapter 2 – Strata CTX100-S/CTX100 Overview describes the system, its basic capacities
and system expansion.
Chapter 3 – Strata CTX670 Overview describes the system, its basic capacities, system
expansion, and remote maintenance.
Chapter 4 – Capacities includes Strata CTX100 and CTX670 capacities for stations and
peripherals, Central Office (CO) lines, station buttons and system features.
Chapter 5 – Universal Slot PCBs provides information about Printed Circuit Boards (PCBs)
that can be installed in the universal slots of the Strata CTX systems.
Chapter 6 – Telephones and Peripherals describes the most recent Toshiba-proprietary
stations and peripherals, customer-supplied peripherals, as well as cabling and connectors.
Chapter 7 – Features describes the features which are available system-wide, as well as
stations features.
Appendix – Specifications includes detailed information on environmental characteristics,
power considerations, hardware compatibility, network requirements, and station
specifications.