Instruction manual
Table Of Contents
- Contents
- Introduction
- Strata CTX28 Overview 1
- Strata CTX100-S / CTX100 Overview 2
- Strata CTX670 Overview 3
- Capacities 4
- Universal Slot Circuit Cards 5
- Telephones and Peripherals 6
- Features 7
- Account Codes
- Add-on Module (DADM)
- Advisory Messages
- Alternate Answer Point
- Automatic Busy Redial
- Automatic Call Distribution (ACD) Server
- Automatic Callback (ACB)
- Automatic Line Selection
- Automatic Release
- Background Music (BGM)
- Call Completion
- Call Forward
- Call History
- Call Park
- Call Pickup
- Call Waiting
- Caller Identification
- Camp on Busy
- Cancel Button
- Centrex/PBX Compatible
- Centrex Ringing Repeat
- Classes of Service (COS)
- Computer Telephony Integration (CTI)
- Conference Calls
- Continuous DTMF Tone
- Credit Card Calling
- CTX WinAdmin
- Data Privacy
- Day/Night Mode - Auto Schedule
- Delayed Ringing
- Destination (Toll) Restriction
- Direct Inward Dialing (DID)
- Dialed Number Identification Service (DNIS)
- Digital Pad
- Direct Inward System Access (DISA)
- Directory Numbers
- Distinctive LED Indicator
- Distinctive Ringing
- Do Not Disturb (DND)
- Direct Station Selection (DSS) Buttons
- DTMF Receivers
- Emergency Call
- Feature Prompting with Soft Keys
- Enhanced E911
- External Amplified Speaker
- Flash Button
- Flexible Line Ringing
- Flexible Numbering
- Handsfree Answerback
- Headset
- Hearing Aid Compatible
- High Call Volume Buttons
- Hold
- Hot Dialing
- Hotline Service
- IP Telephony
- Private Networking Over Internet Protocol
- Integrated Services Digital Network (ISDN)
- Least Cost Routing (LCR)
- Line Buttons
- Live System Programming
- Lost Call Treatment
- Message Waiting
- Microphone (External Unit)
- Music-on-hold
- Multiple Call/Delayed Ringing
- Off-Hook Call Announce (OCA)
- Off-Premise Stations
- Override
- Paging
- Power Failure Protection
- Privacy
- Repeat Last Number Dialed
- Ringing
- Speed Dial
- Station Hunting
- Station Message Detail Recording (SMDR)
- Strata Net Multi-system Networking
- System Fault Finding and Diagnostics
- Transfer
- Tenant Services
- User Programming Mode
- Voice or Tone Signaling
- Voice Mail Integration
- Volume Control
- Appendix - Specifications
- Index

Strata CTX General Description 10/04 11
Strata CTX100-S / CTX100 Overview 2
This chapter provides a system overview of the
Strata CTX100-S and CTX100 telephone
systems.
The Strata CTX100-S/CTX100 systems are
compact systems, yet they provide large system
features (see
Figure 5 and Table 6). They are
designed for wall mounting and occupy very little
space.
The CTX100 processor (ACTU2A) comes with
32 ports (licensed) and can grow to 112 ports by
adding 4-port licenses.
The CTX100-S processor (ACTU2A-S) comes
with 16 ports (licensed) and can grow to 32 ports
by adding two eight-port licenses. Then, it can
grow to 112 ports with four-port licenses.
Note The Strata CTX100-S and CTX100 system capacities depend on the licenses stored on the
system processor and the hardware described in this chapter. See
“CTX100-S/CTX100
License Control” on page 14.
Important! The Strata CTX100-S uses the same hardware and configuration as the Strata
CTX100, with a few exceptions. Whenever the CTX100 is mentioned in this book, it
applies to both the CTX100-S and CTX100, unless specified otherwise.
Each ACTU2 basic processor can be configured with a one or two cabinet system. A single (Base)
cabinet system supports a combination of up to 64 Central Office (CO) lines and stations, while a
two cabinet system (Base and Expansion) can support up to 112 CO lines and stations.
System line and station capacity is expanded by adding CO line and station Circuit cards and port
licenses into its universal slot architecture.
The CTX100 easily connects to outside public and private telephone lines. All of the telephones
(stations) tied to the system can have direct access to each other, as well as to the public and
private network. All lines, stations, and options are tied together through the cabinets.
Table 6 CTX100-S/CTX100 Cabinet Specifications
Cabinet Weight
1
1. Weight includes the processor card in the Base Cabinet and four universal circuit cards in each cabinet.
Height Width Depth
Base Cabinet (CHSUB112) 19.4 lbs. 14.6 in. 11.9 in. 10.2 in.
Base + Expansion Cabinet (CHSUE112) 34.6 lbs. 14.6 in. 19.9 in. 10.2 in.
5976
Base Expansion
Figure 5 CTX100-S / CTX100
Base / Expansion Cabinets