Instruction manual
Table Of Contents
- Contents
- Introduction
- Strata CTX28 Overview 1
- Strata CTX100-S / CTX100 Overview 2
- Strata CTX670 Overview 3
- Capacities 4
- Universal Slot Circuit Cards 5
- Telephones and Peripherals 6
- Features 7
- Account Codes
- Add-on Module (DADM)
- Advisory Messages
- Alternate Answer Point
- Automatic Busy Redial
- Automatic Call Distribution (ACD) Server
- Automatic Callback (ACB)
- Automatic Line Selection
- Automatic Release
- Background Music (BGM)
- Call Completion
- Call Forward
- Call History
- Call Park
- Call Pickup
- Call Waiting
- Caller Identification
- Camp on Busy
- Cancel Button
- Centrex/PBX Compatible
- Centrex Ringing Repeat
- Classes of Service (COS)
- Computer Telephony Integration (CTI)
- Conference Calls
- Continuous DTMF Tone
- Credit Card Calling
- CTX WinAdmin
- Data Privacy
- Day/Night Mode - Auto Schedule
- Delayed Ringing
- Destination (Toll) Restriction
- Direct Inward Dialing (DID)
- Dialed Number Identification Service (DNIS)
- Digital Pad
- Direct Inward System Access (DISA)
- Directory Numbers
- Distinctive LED Indicator
- Distinctive Ringing
- Do Not Disturb (DND)
- Direct Station Selection (DSS) Buttons
- DTMF Receivers
- Emergency Call
- Feature Prompting with Soft Keys
- Enhanced E911
- External Amplified Speaker
- Flash Button
- Flexible Line Ringing
- Flexible Numbering
- Handsfree Answerback
- Headset
- Hearing Aid Compatible
- High Call Volume Buttons
- Hold
- Hot Dialing
- Hotline Service
- IP Telephony
- Private Networking Over Internet Protocol
- Integrated Services Digital Network (ISDN)
- Least Cost Routing (LCR)
- Line Buttons
- Live System Programming
- Lost Call Treatment
- Message Waiting
- Microphone (External Unit)
- Music-on-hold
- Multiple Call/Delayed Ringing
- Off-Hook Call Announce (OCA)
- Off-Premise Stations
- Override
- Paging
- Power Failure Protection
- Privacy
- Repeat Last Number Dialed
- Ringing
- Speed Dial
- Station Hunting
- Station Message Detail Recording (SMDR)
- Strata Net Multi-system Networking
- System Fault Finding and Diagnostics
- Transfer
- Tenant Services
- User Programming Mode
- Voice or Tone Signaling
- Voice Mail Integration
- Volume Control
- Appendix - Specifications
- Index

Strata CTX670 Overview
CTX670 Processor Circuit Cards
16 Strata CTX General Description 10/04
CTX670 Processor Circuit Cards
The system operates with the BCTU only or the BCTU and BEXU processor circuit cards that
install in dedicated slots of the Base Cabinet. The BCTU and BEXU processor incorporates the
following on-board hardware features:
CPU/Memory
The CTX670 uses a high-speed, 32-bit, Reduced Instruction Set Computing (RISC) processor,
Dynamic Random Access Memory (DRAM) working memory, Static Random Access Memory
(SRAM) with lithium battery for back-up memory, and flash program memory.
Large-scale Integrated (LSI) circuits
The processor has LSI circuits that support the following:
• BCTU provides 16 built-in DTMF receivers; 32 available using the BCTU and BEXU. For five
or more DTMF receivers, appropriate licenses are required. See
“CTX670 License Control” on
page 17.
• BCTU provides 16 built-in Busy Tone (BT) detectors for Auto Busy Redial (ABR); 32
available using the BCTU and BEXU.
• BCTU provides 64 built-in conference circuits; up to 96 conference circuits are available using
the BCTU and BEXU. (See
Table 12 on page 26 for more information).
• Built-in, adjustable, digital volume PAD technology enables audio volume to be adjusted in
eight steps to compensate for conference and/or CO line network losses.
Memory Protection Battery
If commercial AC power is lost or if a system is moved or stored without power, the processor has
an internal battery that protects data and the customer’s programmed configuration from memory
loss. This information will be maintained in a powerless system for at least six years.
Music-on-hold/Background Music Interface
An RCA jack and volume control are built into the processor to interface with a Music-on-hold
and/or Background Music source. With the CTX670, you can have up to 15 MOH/BGM sources
by adding:
• Up to two BIOU circuit cards, each provides three MOH/BGM input sources.
• An RSTU circuit card that provides up to eight MOH/BGM input sources.
• MOH/BGM source volume adjustment is controlled by software programming.
SmartMedia Memory
The BCTU processor has an on-board SmartMedia card slot. A SmartMedia flash memory card
can be inserted to backup and restore customer program data. It also makes it easy to upload
operating system data for software upgrades and is used for maintenance functions (see
“System
Fault Finding and Diagnostics” on page 95 for more details).