Instruction manual

Universal Slot Circuit Cards
Station, Line and Option Circuit Cards
Strata CTX General Description 10/04 33
Stratagy IVP8
Supports up to 8 ports, approx. 4 hours of voice storage.
256MB CompactFlash card upgrade provides approx. 16
hrs. of voice storage. Circuit Card has flash momory, 2 RS-
232 ports (1200~9600 bps) for local or remote PC interface.
(See
Stratagy General Description for details).
Stratagy iES32
Preprogrammed for plug-and-play in CTX Base or Exp.,
provides 4~32 voice ports. Also supports fax server and
Unified Messaging (UM). 10/100BaseT Ethernet connection
and a serial port used for Toshiba Proprietary Integration
(TPI). (See
Stratagy General Description for details).
Table 20 CO Line Circuit Cards
Strata Net Over VoIP Interface Unit (BIPU-Q1A)
Provides 16 IP QSIG channels
1 100Base-TX RJ45 port
1 RS-232 maintenance port
QSIG over IP standard protocol (ECMA-336)
Voice coding G.711/G.729A
Built-in Digital Signal Processor (DSP) (BIPS1A-16)
NAT compatible
Interface Options: LAN, Virtual Private Network (VPN)
Internet, VPN WAN, Intranet.
Internet Protocol (IP) Interface Unit (BVPU)
Provides 4 VoIP Circuits as E&M Tie lines
1 10Base-T port
1 RS-232 maintenance port
H.323 standard for Voice over Internet Protocol (VoIP)
Interface Options: LAN, Internet, WAN.
Caller ID Interface Unit (RCIU2)
Provides 4 Caller ID circuits.
With RCIS: 8 circuits.
Interface Options:
Provides Caller ID LCD display for analog loop or ground
start lines with Caller ID. Requires: RCOU, RCOS, RGLU2,
RGLU3 or PCOU. Not compatible with T1.
Caller ID Interface Subassembly (RCIS)
Attaches to the RCIU2.
Same as RCIU2.
Direct Inward Dialing Interface Unit (RDDU)
Provides 4 DID circuits.
Interface Options:
DID analog lines.
Enhanced 911 CAMA Trunk Interface Unit (RMCU/RCMS)
E911 CAMA circuits. Provides up to 4 CAMA trunk
circuits. The RMCU/RCMS eliminates the need for
connection of adjunct terminal adapter equipment to
E911 CAMA trunks.
Requires 1 or 2 RCMS circuit cards for 2 or 4 CAMA lines
respectively.
E911 analog CAMA trunks.
CAMA Trunk Subassembly (RCMS)
RCMS attaches to RMCU. Provides 2 E911 CAMA
circuits.
Up to 2 RCMSs per RMCU for 4 CAMA lines max. (1
RCMS comes packaged with the RMCU.)
Same as RMCU.
Ground/Loop Start Interface CO Line Interface Unit (RGLU2, RGLU3)
Provides 4 ground or loop start line circuits. Each can be
individually set for ground or loop start operation.
Interface Options:
Analog loop or ground start analog lines.
Table 19 Station circuit cards (continued)