Instruction manual

Table Of Contents
Telephones and Peripherals
IP Telephone
Strata CTX General Description 10/04 43
IP Telephone
Toshiba offers an Internet Protocol (IP) Telephone
model, the IPT1020-SD (shown right). The BIPU-M2A
circuit card IP telephone interface must be installed in
the Strata CTX100 or CTX670 (for more details, see
“IP Telephone Features” on page 76).
The IPT1020-SD is a 20-button speakerphone model
equipped with an LCD that displays two rows of 24-
characters. The speakerphone enables users to make and
receive outside and internal calls without lifting the
handset. A full-duplex speakerphone is not supported.
The IPT has the following features:
Full DKT feature set (except Speaker OCA), but supports OCA through the handset
IPT Anywhere
Automatic Configuration
Terminal Authentication (security)
Supports Digital Add-on Modules (DADM3120)
Built-in headset interface for headsets and external speaker connection (HESB)
DKT3001
The DKT3001 is a Digital Single Line Telephone (shown
right). It looks similar to the other 3000-series telephone, but it
has a smaller footprint. It is narrower because there are no
flexible buttons and no LCD.
DKT3001 is not a speakerphone and does not have a Mic
button, so it does not support handsfree answerback or call
origination.
The DKT3001 connects to same digital station port as other
3000-series digital telephones. This makes it compatible with
all Strata CTX and Strata DK systems.
Features
The DKT3001 supports many features of the other 3000-series digital telephones, including:
On-hook dialing
Headset/Loud Ringer Interface (BHEU)
Line button with a red LED. The Line button for the DKT3001 is the [PDN] on this telephone.
Hold button
Cnf/Trn (conference/transfer) button
Flex button (used for Redial or can be programmed as a Flexible button)
Msg button (used for retrieving messages or can be programmed as a Flexible button)
Message Waiting LED
Volume Up/Volume Down button
6742
3532