Datasheet

2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Rear Panel Connections
10 Main Remote Control Functions
14 Zone II Remote Control Functions
15 Installation and Connections
15 Audio Connections
15 Video Connections
16 SCART A/V Connections
18 System and Power Connections
19 Speaker Selection
19 Speaker Placement
20 System Configuration
20 First Turn On
20 Using the On-Screen Display
20 System Setup
20 Input Setup
22 Audio Setup
22 Speaker Setup
25 Surround Setup
27 Adjustments for Other Inputs
27 Delay Settings
27 Night Mode Settings
28 Output Level Adjustment
28 Using EzSet
29 Manual Output Level Adjustment
31 Operation
31 Surround Mode Chart
33 Basic Operation
33 Source Selection
33 6/8-Channel Direct Input
33 Controls and Use of Headphones
34 Surround Mode Selection
34 Digital Audio Playback
35 Dolby Digital
35 DTS
35 PCM Audio Playback
35 HDCD
35 MP3 Audio Playback
36 Selecting a Digital Source
36 Digital Bitstream Indicators
37 Speaker/Channel Indicators
37 Night Mode
38 Tape Recording
38 Front Panel Input/Output Connections
38 Output Level Adjustment
With Source Signals
39 Dim Function
39 Memory backup
40 Advanced Features
40 Surround Amplifier Channel Assignment
40 Front Panel Display Fade
40 Display Brightness
41 Turn-On Volume Level
41 Semi-OSD Settings
41 Full-OSD Time Out Adjustment
42 Multiroom Operation
43 Tuner Operation
43 Basic Tuner Operation
43 Station Selection
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
EXAMPLE – (Synchro type) indicates a message that is displayed on the remote control’s LCD screen
1 – (number in a square) indicates a specific front-panel control
 – (number in a circle) indicates a rear-panel connection
0 – (number in an oval) indicates a button or indicator on the remote
å – (letter in an oval) indicates a button on the Zone II remote
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
EN 55013/6.1990
EN 55020/12.1994
EN 60065:1993
EN 61000-3-2/4.1995
Jurjen Amsterdam
Harman Consumer Group International
04/04
44 Preset Tuning
45 RDS Operation
45 RDS Tuning
45 RDS Display Options
45 Program Search
46 Programming the Remote
46 Preprogrammed Code Entry
47 Automatic Code Entry
47 Learning Commands
48 Changing Devices
49 Macro Programming
50 Punch-Through Configuration
52 EzSet Configuration
53 Renaming
54 Resetting the Remote
56 Troubleshooting Guide
56 Processor Reset
57 Technical Specifications