HK 675 Integrated Amplifier OWNER’S MANUAL HK 675 Power for the Digital Revolution®
Table of Contents 3 Introduction 4 Connections DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY 5 Controls and Functions 6 Remote Control 7 Operating Instructions 7 Troubleshooting 8 Specifications We, Harman Consumer International 2, route de la Tour F-72500 Château-du-Loir France We, Harman Consumer International 2, route de la Tour F-72500 Château-du-Loir France declare in own responsibility, that the declare in own responsibility, that the product described in this owners manual product descr
Introduction Congratulations on your choice of the Harman Kardon HK 675 Integrated Amplifier. In order to obtain the best performance from this integrated amplifier, please be sure to read this owner's manual and use your integrated amplifier only in accordance with its instructions.
Connections Speaker System 1 Right channel Record Player CD Recorder Cassette Tape Deck Speaker System 1 Left channel Right channel Speaker System 2 Left channel Speaker System 2 Video Player 2 Connecting Other Components 1. Make sure your amplifier and other components are turned off. 2. Connect each component's Output/Play jacks to the corresponding Input jacks on the back of your amplifier and, if available, the component’s Input/Record jacks to the Output jacks of the HK 675.
Controls and Functions HK 675 Power switches Press the round Power button (above “Power”) to turn the amplifier on for the first time. The status LED behind the flat “Power” button will turn orange. Once the unit has been turned on with the round power button, this button should be left on for normal use and only turned off when the amplifier will not be used for extended periods of time (vacation, etc.). For daily use, press the flat “Power” button to turn the amplifier on or off (Standby).
Remote Control Independent Remote Control The system remote of the HK 675 can control the amplifier and compatible Tuners, CD Players and CD Recorders. The remote In jack of units without an integrated IR receiver must be connected to the amplifier's remote control output jack so that the system remote control can operate them. The Function Table below will show all functions of the HK 675 and external devices that can be controlled by the HK 675 remote.
Operating Instructions Listening to your CD player, tape deck, tuner or other source 4. Begin playing the desired source. Making a recording 5. Adjust the Volume control to the desired level. 1. Turn Volume control to minimum level and press the round Power button (above ”Power”) to turn the unit to Standby, the power indicator below will light orange. Then press the flat Power switch to turn on the amplifier.
Specifications Continuous Average Power Per Channel (FTC) 20 Hz – 20 kHz, both channels driven 8 Ohms: 4 Ohms: NOMINAL 80 Watts@<0.09%THD 120 Watts@<0.