4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr DISCREET ACOUSTICS modular BEDIENUNGSANLEITUNG . . . . . . . . . . Bitte vor Inbetriebnahme des Gerätes lesen! USER INSTRUCTIONS . . . . . . . . . . . . . . . Please read the manual before using the equipment! MODE D’EMPLOI . . . . . . . . . . . . . . . . . . . . . Veuillez lire cette notice avant d’utiliser le système! S. 2 p. 2 2 p. 4 2 ISTRUZIONI PER L’USO . . . . . . . . . . . . . p.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 2 Inhaltsverzeichnis 1 Seite Sicherheit und Umwelt...............................................................................3 2 Beschreibung .............................................................................................3 2.1 Einleitung.............................................................................................3 2.2 Kapselmodule ................................................................................
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr 1 Sicherheit und Umwelt Seite 3 ! ▲ 1. keine Flüssigkeiten auf dasauf Gerät und lassenund Sie 1. Schütten SchüttenSieSie keine Flüssigkeiten das Gerät keine sonstigen Gegenstände die Geräteöffnungen lassen Sie keine sonstigeninGegenstände in diefallen. Gerä2. Stellen Sie das Gerät nicht in der Nähe von Wärmequellen wie teöffnungen fallen. z.B. Radiatoren, Heizungsrohren, Verstärkern usw. auf und set2.
513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 4 2 Beschreibung 4 2.3 Windschutz W 30 Der W 30 ist ein neuartiger zweischichtiger Windschutz. Zwei verschiedene Materialien optimieren den Wirkungsgrad. 2.4 Montagemodule GN 15 (Best.-Nr. 2765Z0001): 160 mm langer Schwanenhals für fixe Schraubmontage. Kabel mit XLRPhantomspeiseadapter DPA. GN 15 E (Best.-Nr. 2765Z0002): 235 mm langer Schwanenhals mit integriertem XLR-Phantomspeiseadapter DPA.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 5 2 Beschreibung GN 50 E (Best.-Nr. 2765Z0009): Wie GN 15 E. 572 mm lang. GN 50 E 5PIN (Best.-Nr. 2765Z0041): Wie GN 15 E 5PIN. 572 mm lang. GN 50 ESP (Best.-Nr. 2765Z0047): Wie GN 15 ESP. 598 mm lang. GN 50 Minijack (Best.-Nr. 2765Z0037): Wie GN 30 Minijack. 500 mm lang. GN 155 SET (Best.-Nr.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 6 3 Mikrofonanwendungen Bitte beachten Sie, dass der Aufnahmewinkel sowohl den maximalen Besprechungsabstand als auch die abzunehmende Fläche beeinflusst. Je kleiner der Aufnahmewinkel (Hyperniere), desto größer die maximale Distanz zwischen Sprecher und Mikrofon, desto kleiner aber die abzunehmende Fläche. Ob Sie am besten eine Kugel-, Nieren- oder Hypernierenkapsel einsetzen, hängt daher von der jeweiligen Anwendungssituation ab (s. Tabelle 1).
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 7 4 Montage und Anschluss Alle Kapselmodule der Discreet Acoustics Modular Serie sind Kondensatorkapseln und benötigen daher eine Stromversorgung (Phantomspeisung). Die Montagemodule sind für den Anschluss an Mikrofoneingänge mit Phantomspeisung (9 bis 52 V) ausgelegt. 1. Schrauben Sie das Kapselmodul auf das Montagemodul auf. Das Schraubgewinde ist relativ fein und dadurch sehr leichtgängig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 8 4 Montage und Anschluss LED A LED C MIC + MIC GND 1 2 3 4 5 6 7 Fig. 2: Drahtbrücken und Anschlüsse im DPA-P (Werkseinstellung) Siehe Fig. 2. Tabelle 2: Leuchtring und Bassabsenkung • Im Lieferzustand ist je eine Drahtbrücke auf Position 1, 3, 5 und 7 gesteckt: - Wenn Sie die Anlage einschalten, ist das Mikrofon ausgeschaltet und die LED leuchtet nicht. - Um das Mikrofon einzuschalten, drücken Sie die ON/OFF-Taste.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 9 4 Montage und Anschluss Die Positionen 2 bis 6 stellen folgende Funktionen ein: Mikrofon EIN/AUS Funktion der ON/OFF-Taste Mikrofon beim Einschalten der Anlage AUS Mikrofon beim Einschalten der Anlage EIN Drahtbrücken-Kombination 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Tabelle 2a: ON/OFFTaste Push-to-mute Push-to-talk Mikrofon permanent EIN. Taste ohne Funktion.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 10 4 Montage und Anschluss Wichtig: • • • • Position 2, 3 und 4: Stecken Sie nur auf eine dieser Positionen eine Drahtbrücke. Wenn auf keiner dieser Positionen eine Drahtbrücke steckt, hat die ON/OFF-Taste keine Funktion. Position 5 und 6: Stecken Sie immer eine Drahtbrücke auf eine dieser Positionen. Bei Drahtbrücken auf beiden oder keiner dieser Positionen ist das Verhalten des Mikrofons beim Einschalten nicht eindeutig definiert.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 11 4 Montage und Anschluss 1. Montieren Sie das Montagemodul mittels des Montagesockels PS 3 F-Lock auf einer Tischplatte oder mit dem optionalen Stativanschluss SA 60 auf einem Boden- oder Tischstativ. 4.2.2 Montage und Anschluss • Hinweis: Zur besseren Körperschallunterdrückung können Sie das Montagemodul auch mittels der optionalen elastischen Lagerung H 500 (s. Fig. 14) oder H 600 + A 608 (s. Fig.15 und 16) in die Tischplatte einbauen.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 12 4 Montage und Anschluss 4.3 Montagemodule GN 15/30/50 E 4.3.1 Leuchtring Der Leuchtring des GN 15/30/50 E wird über die Phantomspeisung mit Strom versorgt. Wenn Sie das Mikrofon richtig angeschlossen haben, beginnt der Leuchtring mit mäßiger Intensität zu leuchten, sobald Sie die Anlage und die Phantomspeisung einschalten.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 13 4 Montage und Anschluss Audio + 3 LED + LED - 4.4 Montagemodule GN 15/30/50 E 5PIN 4.4.1 Leuchtring 4 2 Audio ground Audio 1 5 R1 V + S1 Fig. 5: Externe Speisung des Leuchtrings - Stift 2 und 4 des 5-poligen XLR-Steckers dienen zur externen Speisung des Leuchtrings. Die Daten des Widerstands R1 hängen von der zur Verfügung stehenden Speisespannung V ab: V 6V 12 V 24 V 48 V R1 390 Ω 1000 Ω 2200 Ω 4700 Ω Max.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 14 4 Montage und Anschluss 1. Löten Sie die schwarze Litze (LED +) und den äußeren Schirm (LED -) vom Phantomspeiseadapter DPA ab. 2. Verbinden Sie die schwarze Litze (LED +) und den äußeren Schirm (LED -) mit einer Spannungsquelle, die eine Versorgungsspannung gemäß Tabelle 4 liefert: Tabelle 4: Elektrische Werte für externe Speisung des Leuchtrings 4.5.2 Montage auf einer Tischplatte, Anschluss Hinweis: Spannung Benötigter Widerstand Max.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 15 4 Montage und Anschluss PT 4000 anschließen. Dazu brauchen Sie lediglich die Anschlüsse im Mini-XLR-Stecker gemäß Fig. 6 zu ändern: Abschirmung •1 •2 • Drahtbrücke 3 rot (Signal) Stift 1: Abschirmung Stift 2: rote Ader (Signal) Stift 3: mit Stift 2 verbinden. Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 16 4 Montage und Anschluss tels eines geschirmten Kabels mit einem Mikrofoneingang mit Phantomspeisung. 5. Wenn die Phantomspeisung Ihres Mischpults schaltbar ist, schalten Sie sie ein. (Lesen Sie dazu in der Bedienungsanleitung Ihres Mischpults nach.) 6. Nur bei externer Speisung: Verbinden Sie das Speisekabel des Leuchtrings mit einer geeigneten Spannungsquelle. 7.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 17 4 Montage und Anschluss 2. Bringen Sie an der Decke einen geeigneten Haken an, bzw. spannen Sie eine Leine quer durch den Raum. 3. Legen Sie das Kabel so über den Haken, bzw. die Leine, dass das Mikrofon in der gewünschten Höhe hängt. 4. Fixieren Sie das Kabel mit Isolierband. • Befestigen Sie das Kabel auf keinen Fall mit einem Knoten am Haken. Wichtig: Fig. 8: Ausrichten des Mikrofons 5.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 18 4 Montage und Anschluss 4.8.2 Anwendungshinweise Fig.9: Theaterbeschallung Fig. 10: Chor-abnahme 4.8.3 Audio-Anschluss 4.9 Montagemodul GN 15 HT Lesen Sie auch die Bedienungsanleitung des Handsenders HT 4000 durch! Leuchtring: Wichtig: 18 Siehe Kapitel 4.5.2, Audio-Anschluss. 1. Schrauben Sie das gewünschte Kapselmodul auf das Montagemodul GN 15 HT auf. 2. Schrauben Sie das Montagemodul auf den Handsender HT 4000 auf. 3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 19 4 Montage und Anschluss Der Leuchtring zeigt also NICHT notwendigerweise an, dass das Mikrofon eingeschaltet ist, und erlischt erst dann, wenn Sie den Handsender ausschalten. • Sie können das Mikrofon selbstverständlich auch als Handmikrofon (z.B. für Fragen aus dem Publikum) verwenden. Das Montagemodul GN 30 OC ist für Tonaderspeisung mit 1,5 bis 10 V ausgelegt. Die freien Kabelenden sind wie folgt beschaltet: Hinweis: 4.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 22 Table of Contents 1 Page Safety and Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.2 Capsule Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr 1 Safety and Environment 1. 2. 3. 4. Seite 23 ! ▲ Do not spill any liquids on the equipment and do not drop any objects through the ventilation slots in the equipment. Do not place the equipment near heat sources such as radiators, heating ducts, or amplifiers, etc. and do not expose it to direct sunlight, excessive dust, moisture, rain, mechanical vibrations, or shock. The packaging of the equipment is recyclable.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 24 2 Description 24 2.3 W 30 Windscreen The W 30 is a newly designed, two-layer windscreen. A special combination of two different materials provides optimum rejection of wind noise. 2.4 Installation Modules GN 15 (Order no. 2765Z0001): 160-mm (6.3-in.) gooseneck with DPA external in-line XLR phantom power adapter for permanent screw-on installation. GN 15 E (Order no. 2765Z0002): 235-mm (9.25-in.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 25 2 Description GN 50 E (Order no. 2765Z0004): Identical to GN 15 E. 572 mm (22.5 in.) long. GN 50 E 5PIN (Order no. 2765Z0041): Identical to GN 15 E 5PIN, 572 mm (22.5 in.) long. GN 50 ESP (Order no. 2765Z0047): Identical to GN 15 ESP. 598 mm (23.5 in.) long. GN 50 Minijack (Order no. 2765Z0037): Identical to GN 30 Minijack. 500 mm (20 in.) long. GN 155 SET (Order no. 2765Z0018): The GN 155 SET Installation Module comprises a 149-cm (61-in.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 26 3 Microphone Applications Note that both the maximum working distance and the area covered by the microphone depend on the pickup angle. The smaller the pickup angle (hypercardioid), the longer the maximum distance between the talker and the microphone and the smaller the area covered by the microphone.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 27 4 Installation and Connection All Discreet Acoustics Modular Capsule Modules are condenser microphones and therefore require a power supply (phantom power). The Installation Modules have been designed for connection to microphone inputs with 9 to 52 V phantom power. 4.1 Capsule Modules 1. Screw the Capsule Module onto the Installation Module. The screw thread is relatively fine and therefore very smooth-running.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 28 4 Installation and Connection LED A LED C MIC + MIC GND 1 2 3 4 5 6 7 Fig. 2: DPA-P jumpers and pinout (factory setting shown). Refer to fig. 2. • At the factory, jumpers have been placed in positions 1, 3, 5, and 7: - On powering up, the microphone will be muted and the LED ring will be dark. - To open the microphone, press the ON/OFF key. The LED ring will be lit to indicate the microphone is open.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 29 4 Installation and Connection Positions 2 through 6 set the following functions: Microphone ON/OFF ON/OFF Key Functions Table 2a: ON/OFF Key Jumper Configurations Microphone OFF on system power-up 1 2 3 4 5 6 7 Microphone ON on system power-up 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Push-to-mute Push-to-talk Microphone permanently ON. Key disabled.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 30 4 Installation and Connection Important: • • • • Positions, 2, 3, 4: Be sure to place a jumper at one (but no more than one) of these three positions. If you place no jumper at any of these positions, pushing the ON/OFF button will have no effect. Positions 5, 6: Make sure there is a jumper placed at one of these positions at all times. With jumpers at both or none of these positions, the microphone status on power-up will be undefined.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 31 4 Installation and Connection 1. Use the supplied PS 3 F-Lock panel mount socket to install the Installation Module in a tabletop or an optional SA 60 stand adapter to mount the Installation Module on a floor or table stand. 4.2.2 Installation and Connection • Note: For even better vibrational noise rejection, you can fix the Installation Module to the tabletop with an optional H 500 (see fig. 14) or H 600 + A 608 shock mount (see figs.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 32 4 Installation and Connection 4.3 GN 15/30/50 E Installation Modules 4.3.1 LED Ring The LED rings on the GN 15/30/50 E operate off phantom power. If you connected the microphone correctly, the LED will be lit at moderate intensity as soon as you switch the system and phantom power on. This indicates that the system is correctly wired and ready to operate but NOT that the microphone channel is open. 4.3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 33 4 Installation and Connection Audio + 3 LED + LED - 4.4 GN 15/30/50 E 5PIN Installation Modules 4.4.1 LED Ring 4 2 Audio ground Audio 1 5 R1 V + S1 Fig. 5: LED ring external powering. - Pins 2 and 4 on the 5-pin XLR connector are available for powering the LED ring from an external source. The specifications of resistor R1 depend on the available powering voltage V: V 6V 12 V 24 V 48 V R1 390 Ω 1000 Ω 2200 Ω 4700 Ω Max.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 34 4 Installation and Connection 1. Unsolder the black wire (LED +) and the outer shield (LED -) from the DPA phantom power adapter. 2. Connect the black wire (LED +) and the outer shield (LED -) to a voltage source with an output voltage as per Table 4: Table 4: Electrical values for external powering of LED ring 4.5.2 Tabletop Installation, Connection Note: Voltage 6V 12 V 24 V 48 V Req`d resistor 390 Ω 1k Ω 2.2 kΩ 4.7 kΩ Max. power 0.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 35 4 Installation and Connection Shield •1 •2 • 3 Wire bridge Red (in phase) Pin 1: shield Pin 2: red wire (in phase) Pin 3: bridge to pin 2 Fig. 6: Connector pinout for connecting to bodypacks Black wire: unused Outer shield: unused The LED rings on the GN 30/50 Minijack Installation Modules will be powered from the phantom supply. (See also Section 4.3.1.) 4.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:45 Uhr Seite 36 4 Installation and Connection 5. If the phantom power on your mixing console is switchable, switch the phantom power on. (Refer to the instruction manual for your mixing console.) 6. External powering only: Connect the feeder cable for the LED ring to a suitable voltage source. 7. Insert the jack plug on the gooseneck into the mini jack on the mounting flange and screw the gooseneck down. 4.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 37 4 Installation and Connection 4. Fix the cable in place with electrician's tape. • Do not tie a knot into the cable to hang it on the hook. Important: Fig. 8: Aligning the microphone. 5. Hold the cable with one hand and turn the microphone carefully into the desired position. • • Refer to fig. 8. To activate the bass cut, refer to Section 4.3.2. To power the LED ring from an external source, refer to Section 4.5.1.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 38 4 Installation and Connection 4.8.2 Applications Fig. 9: Theater stage miking Fig. 10: Miking up a choir 4.8.3 Audio Connection 4.9 GN 15 HT Installation Module Also read the instruction manual of the HT 4000 handheld transmitter! LED ring: 38 Refer to section 4.5.2, Audio Connection 1. Screw the desired Capsule Module onto the GN 15 HT Installation Module CW. 2. Screw the Installation Module onto the HT 4000 handheld transmitter CW. 3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 39 4 Installation and Connection • The LED ring will remain lit even if you press the MUTE button on the transmitter! Remember that the LED ring does NOT necessarily indicate that the microphone is open and will not extinguish unless you switch the transmitter OFF. Important: • Of course, you may also use the microphone handheld, e.g., for questions from the audience. Note: The GN 30 OC Installation Modules has been designed for 1.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 40 5 Specifications Installation Module w/ Type Polar pattern Frequency range Sensitivity Electrical impedance Rated load impedance Power requirement Size (dia. x length) Connector** Installation Module w/ Type Polar pattern Frequency range Sensitivity Electrical impedance Rated load impedance Power requirement Size (dia.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 42 Table des matières 1 Page Sécurité et environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 2.2 Modules capsule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr 1 Sécurité et environnement 1. 2. 3. 4. Seite 43 ! ▲ Attention de ne pas renverser de liquide sur le micro et de ne rien faire tomber dans les ouvertures. Ne laissez jamais le micro à proximité d’une source de chaleur (tuyau de radiateur ou autre appareil de chauffage, ampli. etc.) ni dans un lieu où il risque d’être exposé directement au soleil, à une atmosphère poussiéreuse, à l’humidité, à la pluie, aux vibrations ou aux secousses.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 44 2 Description 44 2.3 Bonnette antivent W 30 La bonnette W 30 est un nouvel écran antivent double couche. L’utilisation de deux matériaux différents permet d’obtenir une efficacité optimale. 2.4 Modules de montage GN 15 (N° de réf. 2765Z0001) : Col de cygne de 160 mm de long pour montage vissé fixe. Câble avec adaptateur XLR DPA pour alimentation fantôme. GN 15 E (N° de réf.
13_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 45 2 Description de montage HCS et adaptateur DPA pour alimentation fantôme fixe ; connecteur type XLR 3 points. GN 50 (N° de réf. 2765Z0008) : Identique au GN 15. 500 mm de long. GN 50 E (N° de réf. 2765Z0009) : Identique au GN 15 E. 572 mm de long. GN 50 E 5PIN (N° de réf. 2765Z0041) : Identique au GN 15 E 5PIN. 572 mm de long. GN 50 ESP (N° de réf. 2765Z0047) : Identique au GN 15 ESP. 598 mm de long. GN 50 Minijack (N° de réf.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 46 3 Utilisations des microphones N’oubliez pas que l’angle de capture influe à la fois sur la distance maximale à la source et sur la surface captée. Plus l’angle de capture est petit (hypercardioïde) plus la distance maximale entre locuteur et micro est grande mais plus la surface captée est réduite. Le choix entre une capsule onmidirectionnelle, cardioïde ou hypercardioïde dépend donc de la situation pour l’utilisation envisagée.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 47 4 Montage et raccordement Tous les modules capsules de la gamme modulaire Discreet Acoustics sont des capsules électrostatiques nécessitant donc une alimentation (alimentation fantôme). Les modules de montage sont conçus pour le raccordement à une entrée de micro avec alimentation fantôme (9 à 52 V). 4.1 Modules capsule 1. Vissez le module capsule sur le module de montage. Le pas de vis est relativement fin et tourne donc facilement.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 48 4 Montage et raccordement LED A LED C MIC + MIC GND 1 2 3 4 5 6 7 Fig. 2 : Straps et raccords dans le DPA-P (réglage usine) Voir Fig. 2. Tableau 2: LED et atténuation des graves • A la livraison un strap est placé sur chacune des positions 1, 3, 5 et 7 : - Lorsque vous mettez l’installation sous tension le micro est éteint et la LED ne s’allume pas. - Pour ouvrir le micro, appuyez sur le bouton ON/OFF.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 50 4 Montage et raccordement Important : • • • • Emplacements 2, 3, 4 : Ne mettez de strap que sur un de ces emplacements. Lorsqu’il n’y a de strap sur aucun de ces emplacements, la touche ON/OFF est sans fonction. Emplacements 5, 6 : Mettez toujours un strap sur un de ces emplacements. Lorsqu’on a un strap sur deux de ces emplacements ou sur aucun d’eux, le comportement du micro n’est pas clairement défini au moment de la mise en service.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 51 4 Montage et raccordement 1. Montez le module de montage au moyen du socle de montage PS 3 F-Lock sur un plateau de table ou bien avec l’adaptateur de pied optionnel SA 60 sur un pied de sol ou de table. 4.2.2 Montage et raccordement • Remarque : Pour une meilleure immunité aux vibrations, vous pouvez également encastrer le module de montage dans la table au moyen du support élastique optionnel H 500 (voir Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 52 4 Montage et raccordement 4.3 Modules de montage GN 15/30/50 E 4.3.1 Anneau lumineux L’anneau lumineux du GN 15/30/50 E fonctionne sur l’alimentation fantôme. Si vous avez raccordé votre microphone correctement, l’anneau lumineux se met en veille dès que le système et l’alimentation fantôme sont sous tension. Ceci signifie que les connexions sont correctes et que le système est en ordre de marche mais PAS que le canal micro est en service.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 53 4 Montage et raccordement 4.4 Modules de montage GN 15/30/50 E 5PIN Audio + 3 LED + LED 4 2 Audio ground Audio 1 5 R1 V + S1 Fig. 5: Alimentation externe de l’anneau lumineux - Les broches 2 et 4 du connecteur XLR 5 points sont destinées à l’alimentation externe de l’anneau lumineux.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 54 4 Montage et raccordement terne (LED -) de l’adaptateur pour alimentation fantôme DPA. 2. Raccordez la tresse noire (LED +) et le blindage externe (LED -) à une source fournissant une tension d’alimentation conforme au tableau 4 : Tableau 4 : Valeurs pour l’alimentation externe de l’anneau lumineux 4.5.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 55 4 Montage et raccordement miniature conformément à la figure 6 : blindage •1 •2 • pontage 3 rouge (signal) Fig. 6 : Brochage de la fiche pour la connexion sur un émetteur de poche Broche 1 : blindage Fil noir : brin libre Broche 2 : fil rouge (signal) Blindage externe : brin libre Broche 3 : relier à la broche 2 L’anneau lumineux du module de montage GN 30/50 Minijack est alimenté via l’alimentation fantôme. (Voir aussi au point 4.3.1).
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 56 4 Montage et raccordement DPA à l’aide d’un câble blindé sur une entrée micro avec alimentation fantôme. 5. Si l’alimentation fantôme de votre table de mixage est commutable, mettez-la en service (consultez à cet effet le mode d’emploi de votre table de mixage). 6. Vaut seulement en cas d’alimentation externe : Raccordez le câble d’alimentation de l’anneau lumineux à une source de tension appropriée. 7.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 57 4 Montage et raccordement 3. Placez le câble sur le crochet ou le fil de manière à ce que le micro soit suspendu à la hauteur voulue. 4. Fixez le câble avec du chatterton. • Ne fixez jamais le câble au crochet en faisant un nœud! Important : Fig. 8: Orientation du microphone 5. Maintenez le câble d’une main et tournez le micro avec précautions pour lui faire occuper la position voulue. • • Voir Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 58 4 Montage et raccordement 4.8.2 Conseils pour l’utilisation Fig. 9: Sonorisation de théâtre Fig. 10: Enregistrement d’une chorale 4.8.3 Raccordement audio 4.9 Module de montage GN 15 HT Reportez-vous également au mode d’emploi de l’émetteur à main HT 4000. Anneau lumineux: 58 Voir au point 4.5.2, Raccordement audio. 1. Vissez le module capsule voulu sur le module de montage GN 15 HT. 2.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 59 4 Montage et raccordement • L’anneau lumineux reste allumé lorsque vous appuyez sur la touche MUTE de l’émetteur à main. L’anneau lumineux n’indique donc PAS obligatoirement que le micro est ouvert ; il ne s’éteint que lorsque vous mettez l’émetteur à main hors tension. Important: • Vous pouvez bien sûr aussi utiliser le microphone comme micro à main (p.ex. pour les questions venant du public).
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 60 5 Caractéristiques techniques Mod. de montage avec Fonctionnement Directivité Réponse en fréquence Sensibilité Impédance électrique Impédance de charge nominale Alimentation Dimensions Connecteur** Mod.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 62 Indice 1 Pagina Sicurezza ed ambiente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 2 Descrizione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 2.1 Introduzione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 2.2 Moduli capsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 2.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr 1 Sicurezza ed ambiente Seite 63 ! ▲ 1. Non fate entrare liquidi nell'apparecchio e non fate cadere oggetti nelle aperture dell'apparecchio. Non posizionate l'apparecchio nella vicinanza di fonti di calore, come p.e. radiatori, tubi del riscaldamento, amplificatori ecc. e non esponetelo direttamente al sole, alla polvere e all'umidità, alla pioggia, a vibrazioni o a colpi. 3. L'imballaggio è riciclabile.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 64 2 Descrizione 2.3 Antisoffio W 30 Il W 30 è un filtro antisoffio a due strati, di nuova ideazione. Due differenti materiali ottimizzano il grado d'efficienza. 2.4 Moduli di montaggio GN 15 (n. d'ordine 2765Z0001): Collo di cigno lungo 160 mm per il montaggio ad avvitamento fisso. Cavo con adattatore XLR per alimentazione phantom DPA. GN 15 E (n.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 65 2 Descrizione GN 50 (n. d'ordine 2765Z0008): Come GN 15. Lungo 500 mm. GN 50 E (n. d'ordine 2765Z0009): Come GN 15 E. Lungo 572 mm. GN 50 E 5PIN (n. d'ordine 2765Z0041): Come GN 15 E 5PIN. Lungo 572 mm. GN 50 ESP (n. d'ordine 2765Z0047): Come GN 15 ESP. Lungo 598 mm. GN 50 Minijack (n. d'ordine 2765Z0037): Come GN 30 Minijack. Lungo 500 mm. GN 155 SET (n.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 66 3 Applicazioni microfoniche Tenete conto del fatto che l'angolo di ripresa influisce sia sulla distanza massima dalla bocca che sulla superficie da riprendere. Più ridotto è l'angolo di ripresa (ipercardioide), più grande è la distanza massima tra oratore e microfono, ma più piccola è la superficie da riprendere.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 67 4 Montaggio e collegamento Tutti i moduli capsula della serie Discreet Acoustics Modular sono capsule a condensatore e necessitano quindi di corrente (alimentazione phantom). I moduli di montaggio sono predisposti per il collegamento ad ingressi microfonici con alimentazione phantom (9-52 V). 4.1 Moduli capsula 1. Avvitate il modulo capsula sul modulo di montaggio. La filettatura è relativamente sottile e quindi ad innesto molto dolce.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 68 4 Montaggio e collegamento LED A LED C MIC + MIC GND 1 2 3 4 5 6 7 Fig. 2: Ponticelli e collegamenti del DPA-P (regolazione in fabbrica) Vedi fig. 2. Tabella 2: Anello luminoso e attenuazione dei bassi • Il microfono viene fornito con rispettivamente un ponticello inserito nella posizione 1, 3, 5 e 7: - quando attivate l’impianto, il microfono è disattivato e il LED non è acceso.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 70 4 Montaggio e collegamento Importante: • • • • Posizione 2, 3, 4: Innestate un ponticello solo in una di queste posizioni. Se non c’è ponticello in nessuna di queste posizioni, il tasto ON/OFF non ha nessuna funzione. Posizione 5, 6: Innestate sempre un ponticello in una di queste posizioni.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 71 4 Montaggio e collegamento 1. Montate il modulo di montaggio sul ripiano di un tavolo servendovi dello zoccolo di montaggio PS 3 FLock o montatelo su un supporto da pavimento o da tavolo servendovi del collegamento opzionale per supporto SA 60. 4.2.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 72 4 Montaggio e collegamento 4.3 Moduli di montaggio GN 15/30/50 E 4.3.1 Anello luminoso L’anello luminoso del GN 15/30/50 E funziona con alimentazione phantom. Se avete collegato correttamente il microfono, l’anello luminoso si accende a luminosità moderata appena attivate l’impianto e l’alimentazione phantom.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 73 4 Montaggio e collegamento Audio + 3 LED + LED 4 2 Audio ground Audio 1 5 R1 V + S1 - I pin 2 e 4 del connettore XLR a 5 poli servono per l’alimentazione esterna dell’anello luminoso. I dati della resistenza R1 dipendono dalla tensione d’alimentazione V a disposizione: V 6V 12 V 24 V 48 V R1 390 Ω 1000 Ω 2200 Ω 4700 Ω Potenza massima 0,1 W 0,25 W 0,25 W 0,5 W Vedi capitolo 4.2.2 e 4.2.3. Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 74 4 Montaggio e collegamento 2. Collegate il cavetto nero (LED +) e lo schermo esterno (LED -) ad una fonte di tensione che fornisce un’alimentazione come indicata nella tabella 4: Tabella 4: Valori elettrici per l’alimentazione dell’anello luminoso 4.5.2 Montaggio sul piano di un tavolo, collegamento Avvertenza: Tensione 6V 12 V 24 V 48 V Resistenza necessaria 390 Ω 1000 Ω 2200 Ω 4700 Ω Potenza massima 0,1 W 0,25 W 0,25 W 0,5 W 1.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 75 4 Montaggio e collegamento schermatura •1 •2 • 3 ponticello rosso (segnale) Pin 1: schermatura Pin 2: filo rosso (segnale) Pin 3: collegare con il pino 2 Fig. 6: Cablaggio del connettore per collegare il trasmettitore da tasca Filo nero: rimane libero Schermatura esterna: rimane libera L’anello luminoso dei moduli di montaggio GN 15/30/50 Minijack viene alimentato di corrente attraverso l’alimentazione phantom (vedi anche capitolo 4.3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 76 4 Montaggio e collegamento 4. Collegate l’adattatore per l'alimentazione phantom DPA mediante un cavo schermato ad un ingresso microfonico con alimentazione phantom. 5. Se l’alimentazione phantom del vostro mixer può venir attivata e disattivata, attivatela (leggere a proposito le istruzioni per l’uso del vostro mixer). 6.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 77 4 Montaggio e collegamento 2. Applicate sul soffitto un gancio adatto o tirate un filo attraverso la sala. 3. Disponete il cavo sul gancio o sul filo in modo che il microfono penda all’altezza desiderata. 4. Fissate il cavo con nastro isolante. • Non fissate il cavo in nessun caso annodandolo sul gancio. Importante: Fig. 8: Posizionamento del microfono 5. Tenete il cavo con una mano e giratelo lentamente nella posizione desiderata.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 78 4 Montaggio e collegamento 4.8.2 Consigli per l’impiego Fig. 9: Sonorizzazione teatro Fig. 5: Ripresa coro 4.8.3 Collegamento audio Vedi. capitolo 4.5.2, Collegamento audio. 4.9 Modulo di montaggio GN 15 HT 1. Avvitate il modulo capsula prescelto sul modulo di montaggio GN 15 HT. 2. Avvitate il modulo di montaggio sul trasmettitore a mano HT 4000. 3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 79 4 Montaggio e collegamento • L’anello luminoso rimane acceso anche quando premete il tasto MUTE disposto sul trasmettitore a mano! L’anello luminoso NON indica quindi necessariamente che il microfono è acceso e si spegne solo quando disinserite il trasmettitore a mano. Importante: • Potete usare il microfono naturalmente anche come microfono portatile (p.e. per domande dal pubblico).
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 80 5 Dati tecnici Mod. di montaggio con Funzionamento Direttività Risposta in frequenza Sensibilità Impedenza elettrica Impedenza di carico nominale Alimentazione Dimensioni Connettore** Mod.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 82 Indice 1 Página Seguridad y medio ambiente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 2 Descripción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 2.1 Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 2.2 Módulos cápsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 2.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr 1 Seguridad y medio ambiente 1. 2. 3. 4. Seite 83 ! ▲ No se deben derramar líquidos sobre el aparato ni deben caer otros objetos en las aperturas del mismo. El aparato no se debe colocar junto a fuentes de calor como por ejemplo radiadores, tuberías de calefacción o amplificadores ni debe ser expuesto a la luz solar directa, a la acción del polvo y la humedad, a la lluvia, a vibraciones o golpes. El embalaje es reciclable.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 84 2 Descripción 2.3 Dispositivo cortaviento W 30 El W 30 es un nuevo dispositivo cortaviento de dos capas. La utilización de dos materiales diferentes optimiza el rendimiento. 2.4 Módulos de montaje GN 15 (N° de pedido 2765Z0001): Módulo cuello de cisne de 160 mm para el montaje fijo por tornillos. Cable con adaptador XLR de alimentación fantasma DPA.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 85 2 Descripción tasma DPA de conexión fija con conector XLR de 3 polos. GN 50 (N° de pedido 2765Z0008): Como GN 15. Longitud: 500 mm. GN 50 E (N° de pedido 2765Z0009): Como GN 15 E. Longitud: 572 mm. GN 50 E 5PIN (N° de pedido 2765Z0041): Como GN 15 E 5PIN. Longitud: 572 mm. GN 50 ESP (N° de pedido 2765Z0047): Como GN 15 ESP. Longitud: 598 mm.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 86 3 Utilización de los micrófonos Tenga en cuenta que el ángulo de grabación influye tanto sobre la distancia máxima del locutor como la superficie a cubrir. Cuanto menor sea el ángulo de grabación (hipercardioide) tanto mayor es la distancia máxima entre el locutor y el micrófono, pero tanto menor la superficie a cubrir.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 87 4 Montaje y conexión Todos los módulos cápsula de la serie modular Discreet Acoustics son cápsulas de condensador y requieren por lo tanto una alimentación de corriente (alimentación fantasma). Los módulos de montaje pueden ser conectados a entradas de micrófono con alimentación fantasma (9 a 52 V). 1. Atornille el módulo cápsula sobre el módulo de montaje. La rosca es bastante fina y por lo tanto de fácil marcha.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 88 4 Montaje y conexión LED A LED C MIC + MIC GND 1 2 3 4 5 6 7 Fig. 2: Puentes alámbricos y conexiones en el DPA-P (ajuste de fábrica) Véase Fig. 2.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 89 4 Montaje y conexión Las posiciones 2 a 6 ajustan las funciones siguientes: Micrófono ON/OFF Función de la tecla ON/OFF Combinación de puentes alámbricos Micrófono al conectar el equipo en OFF 1 2 3 4 5 6 7 Micrófono al conectar el equipo en ON 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Cuadro 2a: Tecla ON/OFF Push-to-mute Push-to-talk Micrófono permanentemente en ON. Tecla sin función.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 90 4 Montaje y conexión Importante: • • • • Posición 2, 3, 4: coloque un puente alámbrico solamente sobre una de estas posiciones. Si en ninguna de estas posiciones se encuentra un puente alámbrico, la tecla ON/OFF no tiene ninguna función. Posición 5, 6: coloque siempre un puente alámbrico sobre una de estas posiciones.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 91 4 Montaje y conexión volver a controlar a través de la abertura para la tecla ON/OFF al introducir el circuito impreso. 1. Monte el módulo de montaje mediante el soporte de montaje PS 3 F-Lock en el tablero de la mesa o mediante el empalme de trípode opcional SA 60 en un trípode de suelo o de mesa. 4.2.2 Montaje y conexión • Nota: Para una mejor supresión del ruido vibracional Vd.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 92 4 Montaje y conexión 4.3 Módulos de montaje GN 15/30/50 E 4.3.1 Anillo luminoso El anillo luminoso del GN 15/30/50 E se acciona mediante la alimentación fantasma. Cuando el micrófono está conectado correctamente, el anillo luminoso se ilumina con intensidad reducida al poner en marcha la instalación y la alimentación fantasma.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 93 4 Montaje y conexión Audio + 3 LED + LED 4 2 Audio ground 4.4 Módulos de montaje GN 15/30/50 E 5PIN 4.4.1 Anillo luminoso Audio 1 5 R1 V + S1 Fig. 5: Alimentación externa del anillo luminoso - Las espigas 2 y 4 del conector XLR de 5 polos sirven para la alimentación externa del anillo luminoso.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 94 4 Montaje y conexión 1. Desolde el conductor negro (LED +) y la pantalla exterior (LED -) del adaptador de alimentación fantasma DPA. 2. Conecte el conductor negro (LED +) y la pantalla exterior (LED -) a una fuente de tensión que suministre una tensión de alimentación según el Cuadro 4 (página 84). Cuadro 4: Valores eléctricos para la alimentación externa del anillo luminoso 4.5.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 95 4 Montaje y conexión PT 400 y PT 4000. Para ello, lo único que hay que hacer es modificar las conexiones en el conector mini-XLR: Véase Fig. 6. Apantallamiento •1 •2 • 3 Puente de alambre Rojo (señal) Espiga 1: apantallamiento Espiga 2: hilo rojo (señal) Espiga 3: conectar con la clavija 2 Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 96 4 Montaje y conexión 4. Conecte el adaptador de alimentación fantasma DPA a una entrada de micrófono con alimentación fantasma por medio de un cable blindado. 5. Si la alimentación fantasma de su pupitre mezclador es conmutable, conéctela. (Véase el capítulo correspondiente en el manual de instrucciones de su pupitre mezclador.) 6.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 97 4 Montaje y conexión 2. Coloque un gancho adecuado en el techo o tenda una cuerda a través de la sala. 3. Coloque el cable en el gancho o la cuerda de tal manera que el micrófono quede colgado a la altura deseada. 4. Fije el cable con cinta aislante. • En ningún caso debe Vd. fijar el cable en el gancho con un nudo. Importante: Fig. 8: Orientación del micrófono 5.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 98 4 Montaje y conexión 4.8.2 Aplicaciones Fig. 9: Sonorización de un teatro Fig. 10: Toma de coros 4.8.3 Conexión audio 4.9 Módulo de montaje GN 15 HT Sírvase leer el Manual de instrucciones del emisor manual HT 4000. Anillo luminoso: 98 Véase capítulo 4.5.2, Conexión audio. 1. Atornillar la cápsula de micrófono que se quiera usar en el módulo de montaje GN 15 HT. 2. Atornillar el módulo de montaje en el emisor manual HT 4000. 3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 99 4 Montaje y conexión • El anillo luminoso sigue iluminado cuando se pulsa en el emisor manual la tecla MUTE. Por lo tanto, el anillo luminoso NO indica necesariamente que el micrófono está conectado y se apaga tan sólo cuando se desconecta el emisor manual. Importante: • Por supuesto que el micrófono se puede utilizar también como micrófono manual (p.ej. para escuchar las preguntas del público).
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 100 5 Datos técnicos Módulo de montaje con Modo de funcionamiento Característica direccional Gama de frecuencia Sensibilidad CK 31 CK 32 CK 33 micrófono de condensador con carga permanente cardioide omnidireccional hipercardioide 50-20.000 Hz 20-20.000 Hz 50-20.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 102 Índice 1 Página Segurança e meio ambiente. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 2 Apresentação . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 2.1 Introdução . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 2.2 Módulos de cápsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 2.3 Paravento W 30 .
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr 1 Segurança e meio ambiente 1. 2. 3. 4. Seite 103 ! ▲ Não derrame líquido sobre os dispositivos e não deixe cair qualquer objeto dentro das aberturas dos dispositivos. Não posicione os dispositivos perto de fontes de calor, por exemplo, radiadores, tubos de calefação, amplificadores, etc., e não exponha o dispositivo a radiação solar, poeira ou umidade, chuva, vibrações e golpes. A embalagem é reciclável.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 104 2 Apresentação 2.3 Paravento W 30 O W 30 é um paravento completamente novo e consiste em duas camadas. A sua eficiência baseia-se em dois materais diferentes especialmente seleccionados. 2.4 Módulos de montagem GN 15 (nº de pedido 2765Z0001): Pescoço de cisne de 160 mm para montagem fixa a rosca. Cabo com adpatador XLR de alimentação fantasma DPA.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 105 2 Apresentação GN 50 (nº de pedido 2765Z0008): Idêntico ao GN 15. Comprimento: 500 mm. GN 50 E (nº de pedido 2765Z0009): Idêntico ao GN 15 E. Comprimento: 572 mm. GN 50 E 5PIN (nº de pedido 2765Z0041): Idêntico ao GN 15 E 5PIN. Comprimento: 572 mm. GN 50 ESP (nº de pedido 2765Z0047): Idêntico ao GN 15 ESP. Comprimento: 598 mm. GN 50 Minijack (nº de pedido 2765Z0037): Idêntico ao GN 30 Minijack. Comprimento: 500 mm.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 106 3 Aplicações dos microfones Favor repare que o ângulo de captação influencia não só a distância máxima entre o falante e o microfone, mas também a área a ser captada. Quanto menor for o ângulo de captação (hipercardióide), tanto maior se torna a distância máxima entre o falante e o microfone, tanto menor, no entanto, fica a área a ser captada.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 107 4 Montagem e conexão Todos os módulos de cápsula da série Discreet Acoustics Modular são microfones de condensador e por isso necessitam de alimentação elétrica (alimentação fantasma). Os módulos de montagem foram projetados para serem ligadas às entradas de microfone com alimentação fantasma (9 a 52 V). 1. Atarraxe o módulo de cápsula no módulo de montagem. A rosca é bastante fina e de marcha fácil.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 108 4 Montagem e conexão LED A LED C MIC + MIC GND 1 2 3 4 5 6 7 Fig. 2: Fios de ligação e conexões no DPA-P (ajuste da fábrica) Veja fig. 2. Tabela 2: Anel luminoso e atanuação de graves • Na fábrica cada uma das posições 1, 3, 5 e 7 está provida de um fio de ligação: - Quando ligar a instalação, o microfone está desligado e o LED não está aceso. - Para ligar o microfone pressione a tecla ON/OFF.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 110 4 Montagem e conexão Importante: • • • • Posição 2, 3, 4: coloque apenas um fio de ligação em uma destas posições. Se não houver um fio de ligação em nenhuma destas posições, a tecla ON/OFF não possui função nenhuma. Posição 5, 6: coloque sempre um fio de ligação em uma destas posições.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 111 4 Montagem e conexão 1. Monte o módulo de montagem numa mesa com o pedestal de montagem PS 3 F-Lock ou fixe-o num tripó de chão ou de mesa com a conexão opcional de tripó SA 60. 4.2.2 Montagem e conexão • Nota: Para evitar ruídos de estrutura de forma aínda mais eficaz pode montar o módulo de montagem no tampo da mesa com o suporte elástico opcional H 500 (veja fig. 14) ou H 600 + A 608 (veja fig. 15 e 16). 2.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 112 4 Montagem e conexão 4.3 Módulos de montagem GN 15/30/50 E 4.3.1 Anel luminoso O anel LED do GN 15/30/50 E vem acionado por alimentação fatasma. Se tiver ligado o microfone de maneira correta, o anel LED começa a iluminar-se com baixa intensidade no momento em que põe em funcionamento a instalação e a alimentação fantasma. Isto significa que a instalação está prestes a funcionar, mas NÃO implica que o canal do microfone está ligado. 4.3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 113 4 Montagem e conexão Audio + 3 LED + LED 4 2 Audio ground 4.4 Módulos de montagem GN 15/30/50 E 5PIN 4.4.1 Anel luminoso Audio 1 5 R1 V + S1 Fig. 5: Alimentação externa do anel luminoso - Os pinos 2 e 4 do conector XLR de 5 pólos servem para a alimentação externa do anel luminoso. Os dados da resistência R1 dependem da tensão de alimentação V disponível: V 6V 12 V 24 V 48 V R1 390 Ω 1000 Ω 2200 Ω 4700 Ω Potência máx.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 114 4 Montagem e conexão 1. Dessolde o fio preto (LED +) e a blindagem externa (LED -) do adaptador de alimentação fantasma DPA. 2. Conecte o fio preto (LED +) e a blindagem externa (LED -) com uma fonte de tensão elétrica que providencia uma tensão de alimentação conforme a tabela 4: Tabela 4: Valores elétricos para alimentação externa do anel LED 4.5.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 115 4 Montagem e conexão Precisa sòmente de alterar as conexões dentro da ficha mini-XLR como indicado na figura 6. blindagem •1 •2 • ponte de fio 3 vermelho (em fase) Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 116 4 Montagem e conexão meio de um cabo blindado a uma entrada de microfone com alimentação fantasma. 5. Se a alimentação fantasma da sua mesa de mixagem for comutável, ligue-a (leia o manual da sua mesa de mixagem). 6. Só nos casos de alimentação externa: ligue o cabo de alimentação do anel luminoso com uma fonte adequada de tensão elétrica. 7.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 117 4 Montagem e conexão 3. Posicione o cabo no gancho ou na linha de forma que atinja a altura desejada. 4. Fixe o cabo com fita colante. O cabo não pode torcer. • Não fixe o cabo no gancho, fazendo um nó! Importante: Fig. 8: Posicionar o microfone 5. Segure o cabo na mão e gire o microfone ligeiramente até obter a posição desejada. • • Veja fig. 8. Ativar a atenuação de graves: veja capítulo 4.3.2.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 118 4 Montagem e conexão 4.8.2 Dicas de aplicação Fig. 9: Sonorização num teatro Fig. 5: Captação de um coro 4.8.3 Conexão de áudio 4.9 Módulo de montagem GN 15 HT Leia também o manual do emissor de mão HT 4000! Anel luminoso: 118 Veja capítulo 4.5.2, ligação de áudio. 1. Rosque o módulo de cápsula desejado no módulo de montagem GN 15 HT. 2. Rosque o módulo de montagem no emissor de mão HT 4000. 3.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 119 4 Montagem e conexão • O anel luminoso continua aceso quando pressiona a tecla MUTE no emissor de mão! O anel luminoso NÃO indica necessariamente que o microfone está ligado e se apagará quando desligar o emissor. Importante: • Pode usar o microfone também como microfone de mão (para perguntas do público). Nota: O módulo de montagem GN 30 OC é projetado para a alimentação a-b de 1,5 a 10 V.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 120 5 Especificações Mód. de montagem com Tipo Característica Banda passante Sensibilidade Impedância elétrica Impedância de carga nominal Alimentação elétrica Medidas Conetor** Mód.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd Fig. 11 Fig. 13 122 11.09.2009 10:46 Uhr Fig. 12 Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Fig. 15 Fig. 16 Fig. 17 Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd Fig. 19 Fig. 21 124 11.09.2009 10:46 Uhr Fig.20 Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:47 Uhr Seite 125 Fig. 23 Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:47 Uhr 40 - 42 mm Audio - Audio + LED LED + Fig.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.