Specifications

139
D 542
Item numbers
D 542 6000H1461
D 542E 6000H1462
D 542ST-S 6000H1460
• PA microphone with rugged, all-metal body
• Frequency response optimized for intelligibility
• Long useful life even in tough day-to-day usage
• Frequency response tailored to speech use
Rugged, affordable dynamic cardioid gooseneck micro-
phone for general public address and communications
use. The D 542 provides a frequency response tailored to
speech use for optimum intelligibility as well as good off-
axis rejection for high gain before feedback and sup-
pression of unwanted ambient noise. The all-metal body
ensures a long useful life for the microphone even in tough
day-to-day use.
The D 542 E features a built-in XLR connector for quick
connection, while the D 542 has been designed for perma-
nent (single-hole or screw-on) installation and comes with
a 6-ft. 4-in. (2-m) fixed, unterminated cable. The D 542ST-S
is mounted on a table stand with an on/off switch and
coiled cable with 3-pin XLR connector.
Intercom
SPECIFICATIONS
Polar pattern: cardioid
Frequency range: 150 to 15,000 Hz
Sensitivity: 2.2 mV/Pa (-54 dBV)
Max. SPL for 1 % THD: 133 dB
Equivalent noise level: 21 dB-A
Signal/noise ratio (A-weighted): 73 dB
Electrical impedance: ≤530 ohms
Recommended load impedance: ≥2,000 ohms
Power requirement: 9 to 52 V phantom power to DIN/IEC
Current Consumption: ≤2 mA
Connector: D 542: unterminated cable ends
D 542E / D 542ST-S: 3-pin male XLR
Cable length: D 542: approx. 50 to 100 cm (20 to 40 in.)
Finish: matte grey/black
Size: microphone: 34 dia. x 345 mm (1.3 dia. x 13.6 in.)
gooseneck: dia. 13 x 300 mm (0.51 x 11.8 in.); table
stand (l x w x h): 160 x 120 x 65 mm (6.3 x 4.7 x 2.5 in.)
Net/shipping weight: D 542: 275/422 g (9.6/14.8 oz.)
D 542E: 285/334 g (10.0/11.7 oz.)
D 542ST-S: 805/1,125 g (1.8/2.5 lbs.)
Optional accessories: D 542: ST 5/3; D 542E: PS 3F-Lock
D 542ST-S
7496_04_Fulline_E2_fsch 29.06.2004 13:30 Uhr Seite 139