Specifications

C 2000B
Item numbers
C 2000B (H 100) 2786Z0001
C 2000B/US (SA 61) 2786Z0002
Patents
AT 385.386
US 4.790.021
AT 392.182
DE 4.021.661
US 6.510.231
• Entry-level home recording microphone
• Ideal multitrack recording “workhorse” thanks to
very low self noise
• Cardioid polar pattern for multiplicity of applications
• Exceptionally smooth frequency response
• High SPL capability
• Complete with accessories in “Sound Tool Case”
Project
Studio Line
SPECIFICATIONS
Polar pattern: cardioid
Frequency range: 30 to 20,000 Hz
Sensitivity: 20 mV/Pa (-34 dBV)
Max. SPL for 0.5% THD: 140/150 dB
Equivalent noise level (CCIR 468-3): 30 dB
Equivalent noise level: 20 dB-A
Signal/noise ratio (A-weighted): 74 dB
Preattenuation pad: 10 dB, switchable
Bass cut filter: 6 dB/octave below 500 Hz
Impedance: ≤200 ohms
Recommended load impedance: ≥1000 ohms
Powering: 9 to 52 V phantom power to DIN 45596
Current consumption: ≤2 mA
Connector: 3-pin XLR
Finish: silver grey
Dimensions: 53 dia. x 159 mm (2.1 dia. x 6.3 in.)
Net/shipping weight: 325 g (11.5 oz.) / 950 g (2 lbs.)
Standard accessories: H 100, Sound Tool Case
Optional accessories: B 15, B 18, MK 9/10, N 62E, N 66E,
PF 80, SA 61, ST 12, ST 102A, ST 200, ST 305
One of the basic rules of recording is that the quality of the
recorded signal is determined by the weakest link in the
signal chain. Today, any microphone needs to match the
high quality of 24-bit recording media.
One of the most important requirements for the C 2000B
was therefore high sensitivity. This allows you to lay clean,
noise-free tracks with no risk of noise levels from many
individual tracks combining in the mix. Its high SPL capa-
bility makes the C 2000 B a highly versatile microphone
that can be used even for extremely loud instruments.
The C 2000B will give perfect results for demo recordings,
in the rehearsal room, as well as in the best recording stu-
dios.
24
7496_04_Fulline_E1_fsch 29.06.2004 13:34 Uhr Seite 24