Specifications

D 440
SPECIFICATIONS
Polar pattern: cardioid
Frequency range: 60 to 20,000 Hz
Sensitivity: 2.5 mV/Pa (-52 dBV)
Max. SPL for 1% / 3% THD: 147/156 dB
Equivalent noise level: 18 dB-A
Impedance: ≤600 ohms
Recommended load impedance: ≥2000 ohms
Connector: 3-pin XLR
Finish: matte black
Dimensions: length: 85 mm (3.4 in.);
height: 104 mm (7.1 in.); dia.: 46 mm (1.8 in.)
Net/shipping weight: 148 g (5.2 oz.) / 438 g (15.5 oz.)
Standard accessories: H 440, microphone bag
Optional accessories: MK 9/10, ST 1, ST 12, ST 102A,
ST 200, ST 305, W 880
Item number
D 440 2815Z0001
Patents
AT 403.751
US 6.185.809
• Cardioid instrument microphone
• Extremely rugged
• High performance Varimotion diaphragm (AKG patent)
• Mounts on stands or instruments
The D 440 is a unidirectional dynamic microphone. It has
been designed primarily for tough onstage use on drums,
guitar amps, wind instruments etc. and uses a patented
AKG Varimotion diaphragm. The D 440 has a cardioid polar
response. This means the microphone is most sensitive to
sound arriving from in front of it, less sensitive to sound
arriving from the sides and hardly responds to sound from
the rear. This pickup pattern is virtually the same for all
frequencies (“frequency independent”).
The strong plastic housing and the wire-mesh outer grille
of the D 440 protect the transducer system from damage.
The outer grille and a layer of special fabric beneath it
form a very effective windscreen to suppress pop and wind
noise. An integrated stand adapter provides for precise
microphone alignment with the instrument. The supplied
H 440 bracket allows you to clamp the microphone direct-
ly on a snare drum, tom-tom, or similar percussion instru-
ment.
Emotion
Series
55
7496_04_Fulline_E1_fsch 29.06.2004 13:35 Uhr Seite 55