Specifications

3 Getting Started
3.6 CLA Switch BankThe RF signal level at each antenna input on the antenna splitter(s) depends on the frequency band,
antenna type, cable type, and cable length.
To ensure optimum signal level at the antenna input, set the CLA switches on each antenna booster and
on the antenna splitter(s) as shown in Table 1 below.
1. Remove the cover of the CLA switch bank.
2. Set the three DIP switches as required for your frequency band, antenna model, cable type, and cable
length.
3. Replace the cover.
17
AKG PS 4000
AAAB
SRA2B -> AB 4000 or PS 4000 RA 4000 B ->AB 4000 or PS 4000 SRA 1 -> AB 4000 or PS 4000 AB 4000 -> AB 4000 or PS 4000
RG58 RG213 CLA RG58 RG213 CLA RG58 RG213 CLA RG58 RG213 CLA
(m) (m) (dB) (m) (m) (dB) (m) (m) (dB) (m) (m) (dB)
53 - 57 111 - 121 0 38 - 43 79 - 89 0 8 - 13 16 - 26 0 41 - 46 87 - 97 0
48 - 53 100 - 111 2 33 - 38 68 - 79 2 3 - 8 5 - 16 2 36 - 41 76 - 87 2
43 - 48 89 - 100 4 28 - 33 58 - 68 4 0 - 3 4 31 - 36 66 - 76 4
38 - 43 79 - 89 6 23 - 28 47 - 58 6 6 26 - 31 55 - 66 6
33 - 38 68 - 79 8 18 - 23 37 - 47 8 8 21 - 26 45 - 55 8
28 - 33 58 - 68 10 13 - 18 26 - 37 10 10 16 - 21 34 - 45 10
23 - 28 47 - 58 12 8 - 13 16 - 26 12 12 11 - 16 24 - 34 12
18 - 23 37 - 47 14 3 - 8 5 - 16 14 14 6 - 11 13 - 24 14
AAAB
SRA2B -> AB 4000 or PS 4000 RA 4000 B ->AB 4000 or PS 4000 SRA 1 -> AB 4000 or PS 4000 AB 4000 -> AB 4000 or PS 4000
RG58 RG213 CLA RG58 RG213 CLA RG58 RG213 CLA RG58 RG213 CLA
(m) (m) (dB) (m) (m) (dB) (m) (m) (dB) (m) (m) (dB)
50 - 55 105 - 115 0 36 - 40 75 - 85 0 7 - 12 15 - 25 0 39 - 44 83 - 93 0
45 - 50 95 - 105 2 31 - 36 65 - 75 2 2 - 7 5 - 15 2 35 - 39 73 - 83 2
40 - 45 85 - 95 4 26 - 31 55 - 65 4 0 - 2 4 30 - 35 63 - 73 4
36 - 40 75 - 85 6 21 - 26 45 - 55 6 6 25 - 30 53 - 63 6
31 - 36 65 - 75 8 17 - 21 35 - 45 8 8 20 - 25 43 - 53 8
26 - 31 55 - 65 10 12 - 17 25 - 35 10 10 15 - 20 33 - 43 10
21 - 26 45 - 55 12 7 - 12 15 - 25 12 12 11 - 15 23 - 33 12
17 - 21 35 - 45 14 2 - 7 5 - 15 14 14 6 - 11 13 - 23 14
AAAB
SRA2B -> AB 4000 or PS 4000 RA 4000 B ->AB 4000 or PS 4000 SRA 1 -> AB 4000 or PS 4000 AB 4000 -> AB 4000 or PS 4000
RG58 RG213 CLA RG58 RG213 CLA RG58 RG213 CLA RG58 RG213 CLA
(m) (m) (dB) (m) (m) (dB) (m) (m) (dB) (m) (m) (dB)
47 - 51 100 - 110 0 33 - 38 71 - 81 0 7 - 11 14 - 24 0 37 - 41 79 - 88 0
42 - 47 90 - 100 2 29 - 33 62 - 71 2 2 - 7 5 - 14 2 32 - 37 69 - 79 2
38 - 42 81 - 90 4 24 - 29 52 - 62 4 0 - 2 4 28 - 32 60 - 69 4
34 - 38 71 - 81 6 20 - 24 43 - 52 6 6 23 - 28 50 - 60 6
29 - 34 62 - 71 8 16 - 20 33 - 43 8 8 19 - 23 40 - 50 8
24 - 29 52 - 62 10 11 - 16 24 - 33 10 10 14 - 19 31 - 40 10
20 - 24 43 - 52 12 7 - 11 14 - 24 12 12 10 - 14 21 - 31 12
16 - 20 33 - 43 14 2 - 7 5 - 14 14 14 6 - 10 12 - 21 14
BAND I + II
BAND III + IV
BAND V + VI
Table 1: CLA DIP switch positions depending on frequency band, antenna, cable type, and cable length.
A
A
B B
CLA
14 dB
12 dB
10 dB
8 dB
6 dB
4 dB
2 dB
0 dB
ON
1 2 3
1670_03_PS4000_DT-IT-FRZ 13.10.2003 10:10 Uhr Seite 17