Data Sheet

CUTSHEET
CUTSHEETCUTSHEET
CUTSHEET
AKG ACOUSTICS GMBH LAXENBURGER STRASSE 254, 1230 VIENNA/AUSTRIA
AKG ACOUSTICS, U.S. 8400 BALBOA BOULEVARD, NORTHRIDGE, CA 91329, U.S.A.
© 2014 HARMAN International Industries, Incorporated. All rights reserved. AKG is a trademark of AKG Acoustics GmbH,
registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
www.akg.com
RMU4X PRO
PROFESSIONAL RACK MOUNT UNIT
HIGHLIGHTS
» All in one solution
» Includes antenna front mount cables
» Includes antenna splitter cables
» Compatible with WMS420 / WMS450 /
WMS470 receivers
APPLICATIONS
» Live Sound / Club Music
» Conferences / Presentations / Seminars
» Installations
IT’S ALL IN THE BOX
The RMU4X PRO is a professional rack mount kit including a long and a short rack bracket, a coupling plate, two antenna covers,
two antenna front mount cables, two antenna splitter cables and spare screws. The included rack brackets are compatible with
AKG WMS420, WMS450 and WMS470 wireless receivers. In ONE rack mount kit everything is included to mount ONE receiver.
TWO rack mount kits are required to mount TWO receivers.
The RMU4X PRO includes all necessary items to mount the receiver into a 19” rack and to mount the antennas to the front plate.
Rack Brackets: The receiver + one long and one short rack bracket perfectly fit into one 19” rack unit.
Antenna Front Mount Cables: By using the antenna front mount cables you can easily attach the antennas to the front plate.
Antenna Covers: Whenever the antenna front mount cables are not in use and the antennas are attached to the
rear side of the receiver, you can use the antenna covers to cover the open holes in the rack
brackets.
Coupling Plate: The coupling plate is used when two receivers are combined and mounted into one 19” rack unit,
which requires a second RMU4X PRO.
Antenna splitter cables: The antenna splitter cables are needed when two or more receivers are used simultaneously, to
connect the receivers to an antenna splitter.
Spare screws: The rack mount kit includes spare screws (four for the sides and two for the feet) just in case one
or another screw gets lost.
TECHNICAL SPECIFICATION
Antenna front mount cable: 0,55 m / 1.8 ft. RG58 coaxial cable (50 ohms)
with BNC connectors (1x female, 1x male)
Antenna splitter cable: 0,65 m / 2.1 ft. RG58 coaxial cable (50 ohms)
with BNC connectors (2x male)
Dimensions: 260 x 115 x 50 mm / 10.24 x 4.53 x 1.97 in
Gross weight: 600 g / 1.32 lb
Net weight: 500 g / 1.10 lb
Item number: 7615H06130