User`s manual

3 PREPARATIONS FOR OBSERVATION
3-2-3-2 IX Configuration
1. Tum the light path selector (1) to select the [[ sP W setting.
2. Set the magnification selector knob (7) to IX.
3. Operate the cube turret4o select the [ ( Q J position.
4. If the analyzer U-AN (3) is mounted, disengage it by pulling it out to the far clickstop. (It
makes no difference if the DIC prism U-DICT (4) remains engaged into the light paUi.)
5. Remove all the filters from the light path.
6. Select the LSM light path for the transmitted light detector. (The Light path selector of
the transmitted light detector should be set at the pushed-in position.)
(6) Filter
(5) Condenser
"OPERATOR SERVICE"
objective lens
"OPERATOR SERVICE"
• transmitted light
lamphousing
• lamp socket
(1) Light path selector
"OPERATOR SERVICE"
(4) DIC prism
U-DICT(dummy sikler)
(optional)
"OPERATOR SERVICE"
(2) Cube tun-et
(7) Magnification selector knob
(3) Analyzer
IX-AN
(Optional)
3-9