User`s manual

3 PREPARATIONS FOR OBSERVATION
3-2-4 Selecting the Detection Mode
When the detection mode selector slider (2) is:
• Pushed in, transmitted light is detected by CH2.
• Pulled out, transmitted light is 'detected by CHI.
Consequently, when only transmitted observation is performed, the detection mode selector
slider (2) may be set at either position.
When performing fluorescence observation simultaneously with transmitted observation, set
the detection mode selector slider at the position specified for the specimen fluochrome.
If in doubt about the setting, refer to Section 4-1-2, Adjusting the Scan Unit in the Operation
Manual and follow the prompts of the [Microscope Configuration] window.
(Refer to Section 2-1, Scan Unit in this manual.)
Examples for reference
Observation modes
FITC + TR(Transmitted)
TRITC + TRfTransmitted)
CHI
FITC
TR(Transmitted)
*
CH2
TRfTransmitted)
TRITC
Detection mode
selector slider
Pushed in
Pulled out
[
The middle position of the detection mode selector slider is used for observation
double-stained specimens like FITC+PI.
ion of ^
(5) Filter sliders cover screws
"OPERATOR SERVICE"
(2) Detection mode (D Pinhole turret
selector slider
USm INIEKSITY
0
GOIFOCAL.
BMRIBtR
OLYMPUS
FLUOVIEW
CD
Jf
(4) ND fllter turret
(6) Laser line filter turret
(3) Banier filter slider
3-10