Specifications

ManualsBrandsAKG ManualsMicrophones and systemsSPC 4

BEDIENUNGSANLEITUNG . . . . . . . . . . . .S. 2

Bitte vor Inbetriebnahme des Gerätes lesen!

USER INSTRUCTIONS . . . . . . . . . . . . . . . .p. 10

Please read the manual before using the equipment!

MODE D’EMPLOI . . . . . . . . . . . . . . . . . . . . . .p. 18

Veuillez lire cette notice avant d’utiliser le système!

ISTRUZIONI PER L’USO . . . . . . . . . . . . . .p. 26

Prima di utilizzare l’apparecchio, leggere il manuale!

MODO DE EMPLEO . . . . . . . . . . . . . . . . . . . .p. 34

¡Sirvase leer el manual antes de utilizar el equipo!

INSTRUÇÕES DE USO . . . . . . . . . . . . . . . .S. 42

Favor leia este manual antes de usar o equipamento!

SPC4

1143_BDA_SPC4_cb 02.03.2007 10:15 Uhr Seite 1

Summary of content (12 pages)

PAGE 1
SPC 4 BEDIENUNGSANLEITUNG . . . . . . . . . . . . S. 2 Bitte vor Inbetriebnahme des Gerätes lesen! USER INSTRUCTIONS . . . . . . . . . . . . . . . . p. 1 0 Please read the manual before using the equipment! MODE D’EMPLOI . . . . . . . . . . . . . . . . . . . . . . p. 1 8 Veuillez lire cette notice avant d’utiliser le système! ISTRUZIONI PER L’USO . . . . . . . . . . . . . . p. 2 6 Prima di utilizzare l’apparecchio, leggere il manuale! MODO DE EMPLEO . . . . . . . . . . . . . . . . . . . . p.
PAGE 2
Table of Contents FCC Statement ......................................................................................................10 1 Safety and Environment ....................................................................................11 1.1 Safety..........................................................................................................11 1.2 Environment................................................................................................11 2 Description ................
PAGE 3
1 Safety and Environment ! 1. Do not spill any liquids on the equipment and do not drop any objects through the ventilation slots in the equipment. 2. The equipment may be used in dry rooms only. 3. The equipment may be opened, serviced, and repaired by authorized personnel only. The equipment contains no user-serviceable parts. 4.
PAGE 4
2 Description 2.1 Introduction Thank you for purchasing an AKG product. This Manual contains important instructions for setting up and operating your equipment. Please take a few minutes to read the instructions below carefully before operating the equipment. Please keep the Manual for future reference. Have fun and impress your audience! 2.2 Packing List 1 SPC 4 antenna combiner 1 19" rack mounting kit 2.3 Optional Accessories 2.
PAGE 5
3 Getting Started 3.1 Important Notes 1. Make all antenna cable connections before connecting the unit to power. 2. Do not connect to the SPC 4 to any antenna other than the SRA 2 W or RA 4000 W from AKG. Using other antenna types may cause malfunctioning of the SPC 4. 3. Position the unit such that the front panel ventilation grill cannot be covered. Obstructing the air intake may cause the unit to overheat. ! 1. Unscrew the four rubber feet (1) from the antenna combiner bottom panel. 2.
PAGE 6
3 Getting Started 3.4.2 Mounting Antennas on Floor Stands • When mounting the antenna on a floor stand, be sure to proceed as follows: 1. Use the supplied SA 63 or the integrated stand adapter to mount the antenna on the boom of a boom stand. 2. Pull the boom out all the way to one side to make sure the antenna will be at least 28 inches (70 cm) away from the stand. 3. Extend the stand high enough to place the boom at least 6 ft. (1.8 m) above the floor. 4. Wind the antenna cable around the boom.
PAGE 7
3 Getting Started • To power the SPC 4 you can use either a suitable AC adapter or the optional PSU 4000 central power supply. 3.6 Powering • Do not use any AC adapter other than a type delivering an output voltage of 12 VDC and an output current of 1.4 A or higher. Check that the AC mains voltage stated on your power supply is identical to the AC mains voltage available where you will use your system. Using the power supply with a different AC voltage may cause irreparable damage to the unit.
PAGE 8
4 Operating Notes 4.1 Powering Up and Down Important! ! • To prevent damage from overloading the antenna combiner power supply, always switch power to the various components of your system on and off in the order described in sections 4.1.1 and 4.1.2. 4.1.1 Systems with Distributed Power Supplies Powering Up: 1. Press the ON/OFF key on the antenna combiner to switch power to the antenna combiner ON. The status LED will be lit green. 2. Switch ON all transmitters connected to the antenna combiner.
PAGE 9
5 Cleaning 1. Disconnect the unit from power. 2. To clean the receiver surfaces, use a soft cloth moistened (not soaked!) with water. • Never use any caustic or scouring cleaners or cleaning agents containing alcohol or solvents since these may damage the enamel and plastic parts.
PAGE 10
A C B D Fig. 6 A B C D Fig.
PAGE 11
SRA 2 W SST 4 SST 4 SST 4 SST 4 DC ONLY 12 V/1.4 A SPC 4 DC ONLY 12 V/2 A PSU 4000 DC OUT 2 DC OUT 1 Fig.
PAGE 12
Mikrofone · Kopfhörer · Drahtlosmikrofone · Drahtloskopfhörer · Kopfsprechgarnituren · Akustische Komponenten Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components Microphones · Casques HiFi · Microphones sans fil · Casques sans fil · Micros-casques · Composants acoustiques Microfoni · Cuffie HiFi · Microfoni senza filo · Cuffie senza filo · Cuffie-microfono · Componenti acustici Micrófonos · Auriculares · Micrófonos inalámbricos · Auriculares inalám