User Guide
Table Of Contents
- FIXED FRAME
- Thank you for choosing the Akia™ Fixed Frame projection screen! Congratulations on your new Akia Fixed Frame purchase! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.
- Care & Use Instructions
- Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points below to prevent that from occurring:
- 1. Do not touch the projection surface with your hands
- 2. Do not write or draw on the projection surface
- 3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
- 4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
- 5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
092118-BR www.akiascreens.com
4
Step 9. Two people are suggested for this step. Place the Center Support Bar (J) into the top groove on the back of the
frame (not the one where the spring inserts) at the approximate center point of the frame. Carefully pull the bottom
horizontal frame outward and place the Center Support Bar (J) at the approximate center point of the frame. Carefully
release the frame once the bar is centered. (See illustrations below for details.)
Step 10. After the Center Support Bar (J) secure, connect the center of the vertical portions of the material (2). Be sure to
hook the Springs (B) onto the Tension Rod (I) to avoid damage to the screen material. Next, return to the vertical sides,
securing the remainder of the springs (3). Lastly, secure the remaining springs of the horizontal sides of the screen (4).
(Top of backside of frame)
(Bottom of backside of frame)
Top groove
1
1
1
1
1
2
2
1
4
4
3
3