Instructions / Assembly

(((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( (((
!
Ta
ble&of&Contents
&
GE
NERAL!SAFETY!INFORMATION!AND!WARNINGS!..........................................................................................................................! !
LIST!OF!INCLUDED!PARTS!AND!ACCESSO RIES!.......................................................................................................................................!2!
LIST!OF!ADDITIONAL!TOOLS/SUPPLIES!REQU IRED!FOR !INSTALLATION!................................................................................................!3!
PLANNING!INSTALLATION!.....................................................................................................................................................................!3!
SPECIFICATIONS
!
....................................................................................................................................................................................
!
4
!
DIMENSIONS!.........................................................................................................................................................................................!4!
WIRING!DIAGRAM!................................................................................................................................................................................!5!
FAN!HOUSING!INSTALLATION!(DIRECT!JOIST!MOUNTING!OR!SUSPENSION!BRACKET!JOIST!MOUNTING)!.......................................!5-7!
CLEANING!THE!VENTILATION!FAN!........................................................................................................................................................!8!
!!!!
!WARRANTY…………………………………………………………………………. ……………………………………………………………………………………………………….8!
1-2
....
GENERAL SAFETY INFORMATION AND WARNINGS
For your safety and to ensure proper performance of the unit, it is very important to read
these instructions carefully before installation. Failure to comply with the instructions
contained herein could result in personal injury or property damage. We recommend that
you keep this booklet for future reference. All units should be installed by a licensed
electrician.
1. Electrical service supply must be 120V 60Hz.
2. Do not install where the air temperature will exceed 40
◦
C (104
◦
F).
3. Do not bend or kink the power wires.
4. Follow all local safety and electrical codes, as well as requirements for NEC (National Electrical Code) and
OSHA (Occupational Safety and Health Act).
5. Always disconnect the power supply prior to servicing the fan, motor or junction box.
6. Protect the electrical wires from sharp edges, oil, grease, hot surfaces, chemicals, or other objects.
7. Do not install the unit where ducts where the airflow can be severely restricted.
8. There should always be an adequate air supply to the vented area.
9. This ventilating fan is approved for use over a bathtub or shower when installed in a GFCI(Ground Fault
Circuit Interrupter)-protected circuit. The control device should not be installed within reach of the
bathtub or shower.
10. Do not use to exhaust hazardous or explosive materials and vapors.
11. Disconnect the appliance from the power supply before servicing.
12. Do not use this fan with any solid-state control device.
13. This unit must be properly grounded.
14. Do not install in a cooking area. (See Fig.A)
Fig A Fig B
1
GENERAL SAFETY INFORMATION AND WARNINGSGENERAL SAFETY INFORMATION AND WARNINGS