USE AND CARE GUIDE BPT14-80CL Bathroom Ventilation Fan with Light Questions, problems, missing parts? Before returning to the store, call AKICON Customer Service 8 a.m.-6 p.m.,EST, Monday-Friday 1-302-213-4406 1-302-526-0542 AKICONSHOP.
TABLE OF CONTENTS ........................................................................................................................2 Package and Hardware Contents.......................................................................................................3 Safety Information ..............................................................................................................................4 Preparation ...............................................................................
PACKAGE CONTENTS A C B D PART DESCRIPTION A Fan housing B Light/rim assembly QUANTITY 1 1 PART DESCRIPTION C Glass globe D LED light bulbs HARDWARE CONTENTS (not actual size) AA BB Long Wood Screw Wing Nut Qty. 4 Qty.
SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. 1. 2. Always disconnect the power supply prior to servicing the fan, motor or junction box. n accordance to all local and 3. Follow all local building, safety and electrical codes, as well as NEC (National Electrical Code) and OSHA (Occupational Safety and Health Act). Electric service supply must be 120 volts, 60Hz.
是非成败转 是非成败 滚滚长江东 PREPARATION 滚滚长江 是非成败转 Check area above installation location to be sure that wiring can run to the planned location and that 是非成败 滚滚长江东 Inspect duct work and wiring before proceeding with installation. 滚滚长江 是非成败转 Before installation, provide inspection and future maintenance access at a location that will not interfere with installation work. 是非成败 滚滚长江东 Do not attempt to install this fan in a wall or vaulted ceiling. This fan is for standard horizontal ceiling installation only.
头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 转头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几度 NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几 头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 NEW CONSTRUCTION – ATTACHING TO THE JOIST 转头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 1.1 BEFORE INSTALLATION – Turn off power source. Review all 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几度 safety precautions. 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几 头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 1. Place the fan housing (A) next to a ceiling joist or wall stud 转头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 (1.1).
多少事,滚滚长江东逝水,浪花淘尽英雄。 几度夕阳红。白 今多少事,滚滚长江东逝水,浪花淘尽英雄。 几度夕阳红。白 夕阳红。白发渔樵江渚上,惯看秋月春风。一壶浊酒喜相逢 NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS 度夕阳红。白发渔樵江渚上,惯看秋月春风。一壶浊酒喜相逢 多少事,滚滚长江东逝水,浪花淘尽英雄。 几度夕阳红。白 5. Plug light/rim assembly (B) into the fan housing (A).
发渔樵江渚上,都付笑谈中。 白发渔樵江渚上,都付笑谈中。 ,古今多少事,都付笑谈中。 NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS ,古今多少事,都付笑谈中。 发渔樵江渚上,都付笑谈中。 8. Place glass globe (C) up to the light/rim/assembly (B). Align the three rim locking clips on the light/rim assembly 白发渔樵江渚上,都付笑谈中。 ,古今多少事,都付笑谈中。 (B) with the indents on the glass globe (C). Push glass globe (C) into the light/rim assembly (B) and rotate clock,古今多少事,都付笑谈中。 wise until glass globe stops (open to close distance is 发渔樵江渚上,都付笑谈中。 5-3/16") to lock into place.
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS 4. Mount the fan housing (A) to joist using the long wood screws (AA) on both sides. 4 AA A Hardware Used AA Long wood screw x4 Joist Ceiling board 5. Remove wiring box cover (5.1). Pull the house wires through the wire box cover hole. Using a quick connector, secure 120 V AC house wiring from the wall switch to the fan as shown in the wiring diagram on page 5. 14 AWG is the smallest conductor that should be used for branchcircuit wiring.
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS 8. Slide light/rim assembly (B) onto threaded studs (8.1). Secure with wing nuts (BB). 8 Hardware Used BB Wing nut BB x2 BB 6.1 B 9. Screw two LED light bulbs (D) into the light/rim assembly (B). 9 B D 10. Place glass globe (C) up to the light/rim/assembly (B). Align the three rim locking clips on the light/rim assembly (B) with the indents on the glass globe (C).
CARE AND MAINTENANCE WARNING: Disconnect power supply before servicing. See SAFETY INFORMATION before proceeding. Routine maintenance should be done at least once a year. • Wash grille with mild soap and water, dry with a cloth. • Remove excess dirt and dust from the fan housing with a vacuum cleaner. • Do not use solvents, thinner or harsh chemicals for cleaning the fan. • Do not allow water to enter the motor. • Do not immerse resin parts in water over 140º F.
GUIDE D'UTILISATION ET D'ENTRETIEN BPT14-80CL VENTILATEUR DÉCORATIF AVEC LUMINAIRE À DEL Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au appelez notre service à la clientèle au 8 a.m.-6 p.m.,EST, lundi - le vendredi 1-302-213-4406 1-302-526-0542 AKICONSHOP.
TABLE DES MATIÈRES Caractéristiques du produit...............................................................................................................13 Contenu de l’emballage et quincaillerie incluse ...............................................................................14 Consignes de sécurité ......................................................................................................................15 Préparation ...................................................................
CONTENU DE L’EMBALLAGE A C B D PIÈCE A B C D DESCRIPTION Boîtier du ventilateur Ensemble luminaire/bordure Globe en verre Ampoules à DEL QUINCAILLERIE INCLUSE (grandeur non réelle) AA BB Vis à bois longue Noix d'aile Qté : 4 Qté : 2 14 QUANTITÉ 1 1 1 2
CONSIGNES DE SÉCURITÉ VEUILLEZ LIRE ET CONSERVER CES INSTRUCTIONS. Assurez-vous de lire et de comprendre l’intégralité du présent manuel avant de tenter d’assembler, d’installer ou d’utiliser l’article. 1. Fermez toujours l’alimentation électrique avant d’effectuer l’entretien du ventilateur, du moteur ou de la boîte de jonction. 2. codes locaux et de sécurité, y compris les règlements relatifs aux installations pare-feu. 3.
是非成败 滚滚长江东 PRÉPARATION 滚滚长江 是非成败转 contenu de l’emballage avec la liste des pièces et celle de la quincaillerie incluse. S’il y a des pièces 是非成败 manquantes ou endommagées, ne tentez pas d’assembler l’article.
转头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几度 INSTRUCTIONS POUR L’ASSEMBLAGE DANS UNE NOUVELLE CONSTRUCTION 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几 头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 NOUVELLE CONSTRUCTION – FIXATION AUX SOLIVES 转头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 1.1 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几度 AVANT L’INSTALLATION : coupez l’alimentation électrique. Consultez toutes les mesures de sécurité. 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几 头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 1.
今多少事,滚滚长江东逝水,浪花淘尽英雄。 几度夕阳红。白 夕阳红。白发渔樵江渚上,惯看秋月春风。一壶浊酒喜相逢 INSTRUCTIONS POUR L’ASSEMBLAGE DANS UNE NOUVELLE CONSTRUCTION 度夕阳红。白发渔樵江渚上,惯看秋月春风。一壶浊酒喜相逢 多少事,滚滚长江东逝水,浪花淘尽英雄。 几度夕阳红。白 5. Branchez l’ensemble luminaire/bordure (B) dans le boîtier du 今多少事,滚滚长江东逝水,浪花淘尽英雄。 几度夕阳红。白 ventilateur (A).
白发渔樵江渚上,都付笑谈中。 ,古今多少事,都付笑谈中。 INSTRUCTIONS POUR L’ASSEMBLAGE DANS UNE NOUVELLE CONSTRUCTION ,古今多少事,都付笑谈中。 发渔樵江渚上,都付笑谈中。 8. Placez le globe de verre (C) jusqu'à la lumière/jante/ 白发渔樵江渚上,都付笑谈中。 assemblage (B). Alignez les trois clips de verrouillage ,古今多少事,都付笑谈中。 de la jante sur l'ensemble lumière/jante (B) avec les encoches sur le globe en verre (C).
INSTRUCTIONS POUR L’ASSEMBLAGE DANS UNE CONSTRUCTION EXISTANTE 4. Installez le boîtier de ventilateur (A) à la solive à l’aide des longues vis à bois (AA) de chaque côté. 4 AA A Quincaillerie Utilisée AA Vis à bois longue x4 Solive Panneau plafond 5. Retirez le couvercle de la boîte de câblage (5.1). Passez les 5 Fils de la maison câblage de 120 V c.a. de l’interrupteur mural de la maison au ventilateur tel qu’il est illustré sur le schéma de câblage à la page 5.
INSTRUCTIONS POUR L’ASSEMBLAGE DANS UNE CONSTRUCTION EXISTANTE 8. Glisser l'ensemble lumière / jante (B) sur les goujons 8 Quincaillerie Utilisée BB Noix d'aile BB x1 BB 6.1 B 9. Vissez deux ampoules à DEL (D) dans l’ensemble luminaire/bordure (B). 9 B D 10. Placez le globe de verre (C) jusqu'à la lumière/jante/ assemblage (B). Alignez les trois clips de verrouillage de la jante sur l'ensemble lumière/jante (B) avec les encoches sur le globe en verre (C).
ENTRETIEN AVERTISSEMENT : Coupez l’alimentation électrique avant d’effectuer l’entretien. Lisez les CONSIGNES DE SÉCURITÉ avant de commencer. Vous devez procéder à un entretien au moins une fois par année. • Nettoyez la grille à l’aide de savon doux et d’eau, et essuyez-la avec un linge. • Enlevez la poussière et la saleté du boîtier du ventilateur à l’aide d’un aspirateur. • N’utilisez ni solvant, ni diluant, ni produit chimique fort pour nettoyer le ventilateur.
GUÍA DE USO Y CUIDADO BPT14-80CL VENTILADOR DECORATIVO CON LUZ LED ¿Preguntas, problemas, piezas faltantes? Antes de regresar a la tienda, llame al Servicio al Cliente de AKICON de lunes a viernes de 8 a.m. a 6 p.m., hora estándar del este. 1-302-213-4406 1-302-526-0542 AKICONSHOP.
ÍNDICE Especifcaciones del producto........................................................................................................... 24 Contenido del paquete......................................................................................................................25 Aditamentos......................................................................................................................................25 Información de seguridad....................................................
CONTENIDO DEL PAQUETE A C B D PIEZA A B C D DESCRIPCIÓN Carcasa del ventilador Ensamble de lámpara/reborde Pantalla de vidrio Bombillas LED ADITAMENTOS (se muestran en tamaño real) AA BB Tornillo para madera largo Tuerca de ala Qty. 4 Qty.
INFORMACIÓN DE SEGURIDAD LEA Y GUARDE ESTAS INSTRUCCIONES Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Desconecte siempre el suministro de electricidad antes de realizar tareas de mantenimiento en el ventilador, el motor o la caja de unión. adas, de acuerdo con todos los códigos locales y de seguridad, incluidas las normas para construcción con resistencia al fuego.
滚滚长江东 PREPARACIÓN 是非成败转 Revise los componentes para conductos y el cableado antes de continuar con la instalación. 滚滚长江东 Antes de instalar, asegúrese de dejar un acceso para inspecciones y tareas de mantenimiento futuras 是非成败转 No intente instalar este ventilador en una pared o un techo de bóveda. Este ventilador solamente debe instalarse en techos horizontales estándares.
东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几度 INSTRUCCIONES DE ENSAMBLAJE PARA UNA CONSTRUCCIÓN NUEVA 头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 CONSTRUCCIÓN NUEVA: FIJACIÓN EN VIGUETAS 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几度 1.1 ANTES DE LA INSTALACIÓN – Apague la fuente de alimentación eléctrica. Revise todas las precauciones de seguridad. 头空,青山依旧在,惯看秋月春风。一壶浊酒喜相逢,古今 1. Coloque la carcasa del ventilador (A) junto a una vigueta 东逝水,浪花淘尽英雄。是非成败转头空,青山依旧在,几度 de techo o a un montante de pared (1.1). La carcasa del 2 1 2.
夕阳红。白发渔樵江渚上,惯看秋月春风。一壶浊酒喜相逢 INSTRUCCIONES DE ENSAMBLAJE PARA UNA CONSTRUCCIÓN NUEVA 几度夕阳红。白 多少事,滚滚长江东逝水,浪花淘尽英雄。 5. Enchufe el ensamble de lámpara/reborde (B) en la carcasa del ventilador (A). 夕阳红。白发渔樵江渚上,惯看秋月春风。一壶浊酒喜相逢 多少事,滚滚长江东逝水,浪花淘尽英雄。 几度夕阳红。白 A 夕阳红。白发渔樵江渚上,惯看秋月春风。一壶浊酒喜相逢 5 B 6. Deslice el ensamblaje de luz / llanta (B) sobre los espárragos roscados (6.1). Asegure con tuercas de mariposa (BB). 6 BB Aditamentos utilizados BB Tuerca de ala x2 BB 6.1 B 7.
,古今多少事,都付笑谈中。 INSTRUCCIONES DE ENSAMBLAJE PARA UNA CONSTRUCCIÓN NUEVA 发渔樵江渚上,都付笑谈中。 8. Coloque el globo de vidrio (C) hasta la luz/borde/conjunto ,古今多少事,都付笑谈中。 luz/borde (B) con las muescas en el globo de cristal (C).
INSTRUCCIONES DE ENSAMBLAJE PARA UNA CONSTRUCCIÓN EXISTENTE 4. Instale la carcasa del ventilador (A) en la vigueta usando los tornillos para madera largos (AA) en ambos lados. 4 AA A Aditamentos utilizados AA Tornillo para madera largo x4 Vigueta Tablero del techo 5. Retire la cubierta de la caja del cableado (5.1). Pase 5 cubierta de la caja de cableado.
INSTRUCCIONES DE ENSAMBLAJE PARA UNA CONSTRUCCIÓN EXISTENTE 8. Deslice el ensamblaje de luz / llanta (B) sobre los espárragos roscados (8.1). Asegure con tuercas de mariposa (BB). 8 BB Aditamentos utilizados BB Tuerca de ala x2 BB 6.1 B 9. Enrosque dos bombillas LED (D) en el ensamble de lámpara/reborde (B). 9 B D 10. Coloque el globo de vidrio (C) hasta la luz/borde/conjunto 10 luz/borde (B) con las muescas en el globo de cristal (C).
CUIDADO Y MANTENIMIENTO ADVERTENCIA: Desconecte el suministro de electricidad antes de realizar tareas de mantenimiento. Vea la INFORMACIÓN DE SEGURIDAD antes de proceder. Se debe realizar mantenimiento de rutina al menos una vez al año. • Lave la rejilla con agua y jabón suave, y seque con un paño. • Retire el exceso de polvo y suciedad de la carcasa del ventilador con una aspiradora. • No use solventes, disolventes ni químicos agresivos para limpiar el ventilador. • No permita que entre agua en el motor.