Specification
Page 3
Tools needed:
Level
Flat-blade and
Phillips screw-
drivers
Powered
screwdriver
or drill
Measuring
tape
Utility knife
Marker or
pencil
Table of Contents
INSTALLATION
Mount heights & clearance...........................5-6
Installation....................................................10
Range hood operations ..............................11-12
Product Dimension & Wiring Diagram...........13
USE AND CARE
Tools needed....................................................3
Troubleshooting...........................................14
Parts supplied...................................................4
Use and care information...............................15
Venting requirements.......................................5
Specications..............................................15
MAINTENANCE
Charcoal filter Installation
Calculating vent system length.......................6
Cleaning&
Replacing lter
......
...............16
Venting methods...........................................7-8
Replacing light bulb.......
..........................16-17
Electrical requirements....................................9
...............................8
Disclaimer ....................................................18