Manual

ManualsBrandsAkiles ManualsEquipmentFlexiCloser

Akiles FlexiCloser

Operation Manual

Congratulations on the purchase of your new FlexiCloser, a professional and heavy-duty electric

wire closing machine. Your FlexiCloser was designed with a full range of functions and premium

quality components to guarantee you an eortless and professional bind, as well as many years

of trouble-free service.

We recommend that you take a few minutes to familiarize yourself with the functions of your new

FlexiCloser. You will nd that with just a little practice, any person can achieve professional results.

• World’s ﬁrst SMART-DETECT wire closing system, eliminating the cumbersome procedure to

manually adjust & set-up a machine for dierent wire sizes.

• Included MICRO-ADJUST FEATURE guarantees a perfect wire closing result with all wire types and

brands.

• Included SAFETY SENSOR FEATURE protects the operator’s hands from being accidently injured

by the closer.

• Included HIGH EFFICIENCY MODE allows closing plate to only return half-way after closing a small

wire (3/16” to 9/16”), to reduce the wire closing distance and operation time. This feature can be

enabled or disabled by the operator at any time.

• The wire closing range is designed to close all types of wires, from 3/16” to 1-1/2”, in either 3:1 or

2:1 pitch.

INTRODUCTION

HIGHLIGHTS

IMPORTANT

Control Panel

Wire Closing Plate

Magnetic Guide

Wire Holder

Wire Closer

Channel

Power Switch

Micro-Adjust “+”

Reset / Return

START

Control Panel

Micro-Adjust “-”

Summary of content (4 pages)

PAGE 1
Akiles FlexiCloser Operation Manual INTRODUCTION Congratulations on the purchase of your new FlexiCloser, a professional and heavy-duty electric wire closing machine. Your FlexiCloser was designed with a full range of functions and premium quality components to guarantee you an effortless and professional bind, as well as many years of trouble-free service. IMPORTANT We recommend that you take a few minutes to familiarize yourself with the functions of your new FlexiCloser.
PAGE 2
INSERTING 1. 2. 3. 4. Insert pre-selected wire into Wire Holder. Insert documents from the last page to the first page, and then insert the front cover. The back cover should be inserted last, with the inside facing up. Take out the unbound book from the Wire Holder by lifting the wire upward. Be careful to not let the pages fall out of the wire. 5. TIP: The seam of the closed wire should be inside the back cover of your book. CLOSING 1.
PAGE 3
MICRO-ADJUST FEATURE Control Panel START Micro-Adjust “-” Micro-Adjust “+” Reset / Return 1. Different brands of wires might be produced with different materials and/or different wire forming machines, thus having different flexibilities (wire closing memories). To ensure a perfect wire closing result with all types & brands of wires, your FlexiCloser is equipped with a Micro-Adjust Feature. 2. The Micro-Adjust Feature allows the operator to adjust the closing distance for each wire size independently.
PAGE 4
HIGH EFFICIENCY MODE 1. When closing smaller wires (3/16” to 9/16”), the Wire Closing Plate can be set to only return halfway after each closure, in preparation for the next operation. This is to save operating time and improve efficiency. 2. To check if High Efficiency Mode is currently ENABLED or DISABLED, simply turn off the machine and then turn it on. Within the first few seconds, the LCD Display will show “LO” (High Efficiency Mode enabled) or “HI” (High Efficiency Mode disabled). 3.