Manual

“ ULTRA-LAM” OPERATlONAL MANUAL

I N T R O D U C T I O N :

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW ULTRA-LAM, A HEAVY DUTY POUCH

LAMINATOR. YOUR ULTRA-LAM WAS SPECIALLY DESIGNED WITH THE HIGHEST AVAILABLE

TECHNOLOGY AND PREMIUM QUALITY COMPONENTS, TO RENDER YOU A HIGH QUALITY LAMINATION,

AS WELL AS MANY YEARS OF TROUBLE-FREE SERVICE.

THE ULTRA-LAM CAN OPERATE WITH ANY STANDARD LAMINATING POUCH CURRENTLY IN THE MARKET.

IT WAS SPECIALLY DESIGNED TO OPERATE WITH OR WITHOUT A CARRIER NOTE: WE ONLY

RECOMMEND THE USE OF CARRIERS WITH INFERIOR QUALITY POUCHES (HIGH ADHESIVE

COMPOSITION i.e. 10 MILS (4/6) POUCHES), AS THEY MAY EXCRETE EXCESSIVE ADHESIVE, WHICH CAN

POTENTIALLY DAMAGE THE SYSTEM.

IMPORTANT: WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOURSELF WITH

THE FUNCTIONS OF YOUR NEW ULTRA-LAM. YOU WILL FIND OUT THAT WITH JUST A L.ITTLE PRACTICE,

ANY PERSON CAN ACHIEVE A PROFESSIONAL LAMINATION.

4. EXIT

O P E RAT I O N :

- PLACE YOUR NEW ULTRA-LAM ON TOP OF A WORKING TABLE.

- PLUG POINER TO A GROUNDED 110V OUTLET (220V FOR CERTAIN COUNTRIES)

- PRESS POWER SWITCH TO THE ON POSTION (2). THE POWER LIGHT WILL TURN ON INDICATING

THAT THE ULTRA-LAM HAS BEEN ACTIVATED.

- THE READY LIGHT (3) WILL TURN ON IN APPROXIMATELY 2-3 MINUTES, LETTING YOU KNOW THAT

THE ULTRA-LAM IS READY TO START LAMINATING.

- PRESS THE MOTOR SWITCH (1) TO THE ON POSTION.

- INTRODUCE THE DOCUMENT TO BE LAMINATED INTO THE POUCH.

- INTRODUCE THE POUCH (SEALED SIDE FIRST) INTO THE ENTRANCE (7) OF THE ULTRA-LAM.

- REMOVE THE POUCH FROM THE EXIT (4) OF THE ULTRA-LAM.

- PRESS “OFF” (1 & 2) THE ULTRA-LAM ONCE YOU ARE FINISHED LAMINATING.

- IMPORTANT: EACH UNIT HAS BEEN PRESET AT THE FACTORY AND REQUIRES NO ADJUSTMENTS

TO LAMINATE OUR 7 MIL POUCHES.

T I P S :

- ALWAYS TURN “OFF” THE ULTRA-LAM IF YOU WILL STOP LAMINATING FOR LONG PERIODS OF TIME.

- ALWAYS MAINTAIN THE ULTRA-LAM ON STAND BY (POWER “ON” POSITION) IF YOU WILL CONTINUE

LAMINATING WITHIN A FEW MINUTES. THIS FEATURE WILL ALLOW YOU TO INSTANTLY RE-START

LAMINATING, WITHOUT DEPRECIATING THE MOTOR OR ROLLERS.

PAGE 1
“ ULTRA-LAM” OPERATlONAL MANUAL INTRODUCTION: CONGRATULATIONS ON THE PURCHASE OF YOUR NEW ULTRA-LAM, A HEAVY DUTY POUCH LAMINATOR. YOUR ULTRA-LAM WAS SPECIALLY DESIGNED WITH THE HIGHEST AVAILABLE TECHNOLOGY AND PREMIUM QUALITY COMPONENTS, TO RENDER YOU A HIGH QUALITY LAMINATION, AS WELL AS MANY YEARS OF TROUBLE-FREE SERVICE. THE ULTRA-LAM CAN OPERATE WITH ANY STANDARD LAMINATING POUCH CURRENTLY IN THE MARKET.
PAGE 2
TEMPERATURE ADJUSTMENTS TEMPERATURE CONTROL ULTRALAM250P ULTRALAM250B - IF THE POUCH IS NOT SEALING WELL (IT APPEARS MILKY), THE TEMPERATURE MAY BE TOO COLD FOR THE POUCH THICKNESS THAT YOU WISH TO LAMINATE. CORRECTIVE ACTION: A. MAKE SURE THAT THE READY LIGHT IS ON. B. IF THE READY LIGHT IS NOT ON, SIMPLY WAIT UNTIL THE READY LIGHT TURNS ON AND PROCEED TO LAMINATE. C.