1 PREFACE 3 2 SAFETY PRECAUTIONS 3 3 IN THE CARTON 5 4 FRONT BACK CONNECTIONS OF LCD 6 5 6 7 8 BASIC INSTALL ATION REMOTE CONTROL MENU OPERATION DVD OPERATION AV Connection YPbPr Connection HDMI Connection USB Connection 7 7 8 8 9 9 10 10 Remote control instructions in TV mode 11 Remote control instructions in DTV / USB mode 12 Remote control instructions in TELETEXT mode 13 Remote control instructions in DVD mode 14 Remote control setup 15 INPUT SOURCE 16 Power Cord Connec
9 TROUBLESHOOTING AND ADVICE 41 10 SPECIFICATIONS 42 2
1.PREFACE Thank you for buying this TV ! Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV is damaged, do no install it and contact your dealer. Check that you have all the accessories according to the model. 2.SAFETY PRECAUTIONS Put the TV on a stable surface. Do not place any material on the TV. Minimum distances 10cm 10cm 20cm 5cm Do not use the TV with fixtures other than those provided or suggested by the manufacturer.
Keep the TV dry and away from humidity. Keep the TV away from heat sources. Unplug the TV before cleaning it. Do not use solvent or liquid to clean the TV. Only clean the TV with a soft and dry cloth. In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or other incidents. Unplug the TV during lightening storms or when unused for long periods of time. 1.
3 . IN THE CARTON R.LIS T LCD TV SET T.LIST Remote Control USER'S MANUAL 1.5V 1.
4 . FRONT , BACK , CONNECTIONS OF LCD Front View 1 3 2 5 4 6 7 1. Press “ SOURCE ” to select the input source. SOURCE MENU CH- CH+ VOL- VOL+ 2. Press “ MENU ” to bring up the main menu on the screen. POWER 3. Press “ CH+ ” or “ CH- ” to scan through channels. 4. Press “ VOL+ ” or “ VOL- ”to increase or decrease the sound level. 5. PLAY/PAUSE in DVD mode; 6. OPEN/CLOSE in DVD mode; 7. Press “ POWER” button to turn the TV on or off. 8.
5. BASIC INSTALL ATION Power Cord Connection On Off - Connect the power cord correctly as shown. - Press the POWER button of your LCD TV to switch on the LCD TV. The power indicator on the front panel lights up in Green or Blue. Antennas Connection VHF ANTENNA UHF ANTENNA OUTDOOR ANTENNA AMPLIFIER INDOOR ANTENNA AMPLIFIER RF IN 75 OHM ANTENNA PLUG POWER PLUG OF ANTENNA AMPLIFIER To ensure good picture and sound, TV antenna system needs to be instalLCD.
SCART Connection CI Port HDMI VGA(PC) PC AUDIO Pb Pr VIDEO R L Y SCART TV Back RF IN PHONE Scart cable DVD or VCR Back DVD or VCR Connect the SCART connector on the external video device to the SCART connector on the set using a SCART cable.Select SCART input source with using the SOURCE button. VGA(PC) Connection CI Port USB HDMI VGA(PC) PC AUDIO SCART VGA Cable Pb Pr VIDEO R L Y TV Back Audio Cable Connect the RGB output of the PC to the VGA jack on the TV set.
AV Connection CI Port VGA(PC) PC AUDIO Pb Pr VIDEO R L Y SCART TV Back PHONE RF IN Video cable DVD or VCR back DVD or VCR Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV jacks on the TV set using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red. Select the AV input source via the SOURCE button on the remote control.
HDMI Connection CI Port USB VGA(PC) HDMI PC AUDIO SCART Pb Pr VIDEO R L Y TV Back HDMI cable DVD or VCR back DVD or VCR The HDMI input connection enables the digital transfer of audio/video/control signals through one cable only. USB Connection USB Port CI Port USB HDMI VGA(PC) PC AUDIO SCART Pb Pr VIDEO R L Y TV Back RF IN Insert the USB flash drive to the USB port. Select USB channel source via the SOURCE button on the remote control.
6 . REMOTE CONTROL Remote control instructions in TV mode MUTE POWER POWER Turn the LCD TV ON or OFF. MUTE Press to mute the sound. Press again or press VOL+ to un-mute the TV. NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV. The channel change after 2 seconds. 10 PROGRAM +10 LIST DISPLAY INFO ASPECT ZOOM MENU EXIT OK ENTER SLEEP D.SETUP TTX REPEAT SOURCE D.MENU TITLE R.LIST T.LIST D.
Remote control instructions in DTV / USB mode NUMBER BUTTONS Press 0-9 to select a channel. MUTE POWER INFO Press to display the source and channel's information. CH+/CHWhen watching a channel, changes the channel. 10 PROGRAM +10 LIST DISPLAY INFO ASPECT ZOOM MENU EXIT OK ENTER SLEEP D.SETUP TTX REPEAT SOURCE D.MENU TITLE R.LIST T.LIST D.
Remote control instructions in TELETEXT mode MUTE POWER NUMBER BUTTONS Press 0-9 to select a teletext page. 10 PROGRAM +10 LIST DISPLAY INFO CH+/CHPage up and Page down. ASPECT ZOOM MENU EXIT OK ENTER TTX Press to switch between TV and Teletext mode. SLEEP D.SETUP TTX REPEAT SOURCE D.MENU TITLE R.LIST T.LIST D.DISPLAY INDEX HOLD A-B GOTO I/II REVEAL SIZE SUBTITLE EPG FAV AUDIO REC SUBPAGE TV / RADIO COLOR BUTTONS Select 4 Preferred TELETEXT page.
Remote control instructions in DVD mode Note: Please ensure that the TV you have bought with DVD loader, otherwise, all these parts with no effect. NUMBER BUTTONS Numerical buttons for various data. MUTE POWER PROGRAM Program a disc playing in a desired sequence. ZOOM In play state, press ZOOM, the player will zoom in the picture one time. THUMBSTICK( ▲/ ▼/◄ / ►/ OK ENTER ) Allows you to navigate the on-screen menus and adjust the system settings to your preference.
Remote control setup 1. Open the cover. 2. AAA size batteries, When inserting the batteries, make sure correct polarities as per“+”and “-” marks o n the batteries and within the battery compartment . 3. Replace the battery cover. To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 2. Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc) 3.
7.MENU OPERATION INPUT SOURCE Iuput Source ATV DTV USB AV VGA YPbPr DVD SCART HDMI1 HDMI2 Enter Press SOURCE button to display the input source list; Press ▼ / ▲ or SOURCE button to select the input source you want to watch; Press OK button to enter the input source; Press EXIT button to quit; CHANNEL MENU Press MENU button to display the main menu. Press ◄ / ► button to select CHANNEL in the main menu, it will highlight the first option.
Auto Tuning Press ▼ / ▲ button to select Auto Tuning, then press OK button to start auto search. Tune Type Channel Tuning ATV+DTV ▲ Italy Portugal France Germany Spain TV DTV Radio Data ▼ ▲ Other 1% : : : : 0 programme 0 programme 0 programme 0 programme 67.30mHz (TV) ▼ Please press MENU key to skip Enter Menu DTV Manual Tuning Press ▼/▲ button to select DTV Manual Tuning, then press OK button to enter Sub-menu. DTV Manual Tuning ◄- +► UHF CH 21 NO SIGNAL Bad Freq: 177.
Programme Edit Press ▼ / ▲ button to select Program Edit, then press OK button to enter sub-menu. ► ► Programme Edit 1 C-01 ATV 2 S-42 ATV 3 S-09 ATV 4 S-05 ATV 5 C-11 ATV 6 S-30 ATV 7 S-37 ATV 8 C-26 ATV 9 C-44 ATV 10 C-56 ATV Delete Enter Rename FAV Move Fav Skip Menu ·Use Red button to delete the current channel. ·Use Green button to set the current channel to Rename. ·Use Yellow button and the ▲/▼arrow button to move the current channel.
PICTURE MENU Press MENU button to display the main menu. Press ◄ / ► button to select PICTURE in the main menu, it will highlight the second option. 1. Press ▼ / ▲ button to select the option that you want to adjust in the PICTURE menu. 2. Press OK button to adjust.
SOUND MENU Press MENU button to display the main menu. Press ◄ / ► button to select Sound in the main menu, it will highlight the third option. Sound Mode Standard Treble 50 Bass 50 Balance SOUND Move MENU 0 Auto Volume Off Surround Sound Off Return Enter Select EXIT Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the SOUND menu. 2. Press ◄ / ► button to adjust. Sound Mode Press ▼/▲ button to select Sound Mode, then press OK button to enter sub-menu.
TIME MENU Press MENU button to display the main menu. Press ◄ / ► button to select TIME in the main menu, it will highlight the fourth option. 01/Jan 04:28 Clock Off Time Off On Time Off Time Zone TIME Move MENU GMT+1 Sleep Timer Auto Standby Off OSD Timer 10s Return Enter Select 4H EX IT Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the TIME menu. 2. Press ◄ / ► button to adjust. Clock Display the current system time.It’s not available.
LOCK MENU Press MENU button to display the main menu. Press ◄ / ► button to select LOCK in the main menu, it will highlight the fifth option. Lock System Off Set Password Block Program LOCK Move MENU Parental Guidance Off Key lock Off Return Enter Select EX IT Exit 1. Press ▼ / ▲ button to select the option that you want to adjust in the LOCK menu. 2. Press ◄ / ► button to adjust.
SETUP MENU Press MENU button to display the main menu. Press ▼ / ▲ button to select Setup in the main menu, it will highlight the sixth option. OSD Language English TTX Language Audio Language West English Subtitle Language English PVR File System Recorder Schedule List Aspect Ratio Blue Screen First Time Installation Reset SETUP Move MENU Return Enter Select 16:9 On EX IT Exit 1. Press ▼/▲ button to select the option that you want to adjust in the SETUP menu. 2. Press ◄/► button to adjust.
Recorder Press MENU button on the remote control to display the main menu; Use ◄/►button to select SETUP, and use ▼/▲ button to select Recorder. Then press OK button enter the sub-menu. Aspect Ratio Press ▼ / ▲ button to select Aspect Ratio, then press OK button to enter sub-menu. Blue Screen Press ▼ / ▲ button to select Blue Screen, then press ◄/► button to select on or off.
Vertical Pos. Press ▼/▲ button to select Vertical Pos. , then press OK Button to enter sub-menu.Press ◄/► button to adjust. Size Press ▼/▲ button to select Size, then press OK button to enter sub-menu.Press ◄/► button to adjust display size. Phase Press ▼/▲ button to select Phase, then press OK button to enter sub-menu.Press ◄/► button to adjust. VGA(PC) Notes: 1. Noise Reduction in PICTURE option is invalid. 2. SOUND menu and description are the same as that for DTV mode. 3.
MEDIA(USB) MENU Note:Before operating MEDIA menu,Plug in USB device,then press SOURCE button to set the Input Source to USB, then press OK button to enter. USB 2.0 Press ◄/► button to select the option you want to adjust in the main MEDIA menu, then press OK button to enter. PHOTO Menu Press ◄/► button to select PHOTO in the main menu, then press OK button to enter. USB 2.0 Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter.
PHOTO 1/1 C:\ Retun music -MSTPVR picture Delete EXIT Exit Press ◄/► button to select the file folder you want to search in the file selecting menu, then press OK button on your remote control to enter sub-menu. Press ◄/► button to select the file you want to delete in the file selecting menu, then press red button On your remote control to delete files. MUSIC Menu Press ◄/► button to select MUSIC in the main menu, then press OK button to enter. USB 2.
MOVIE Menu Press ◄/► button to select MOVIE in the main menu, then press OK button to enter. USB 2.0 Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter. Press ◄ / ► button to select return option to back to the previous menu. MOVIE 1/1 C:\ Retun -MSTPVR music .avl MPEG4_311F_720X5- [3.av] Delete EXIT picture Exit Press EXIT button to return back to the previous menu.
TEXT 1/1 C:\ Retun -MSTPVR music Delete picture EXIT Exit Press EXIT button to return back to the previous menu. When highlighting the option you select,the file information will appear on the right and text will be previewed in the center. Press OK button to view the selected text. PVR MENU Instant Recorder Note:Make sure you have insert the USB device to the TV board before you start to do the recording. Press REC button on your remote control to start record whenever you want to start.
Press ◄/► button to select stop PVR or not. Press ◄/► button to select to play the recorded program during recording. [00:00:20/00:02:13] Play FB Prev. FF Next Pause Stop 14:28 You can press the button on the control bar to play,fastback,fastforward,play previous,play next, pause or stop playing. Note: you can also play the recorded program in the file named ” _MSTPVR” under the MOVIE file in the USB Source.
File System Size PVR File SystemType FAT32 PVR File System Size All SD 104 Mins HD 29 Mins Enter Press ▼/▲ button to select PVR File System Type, then press ◄/► button to select the system type, press OK button to format the disk, a dialog will be displayed as follows: Format disk Format disk Warning ! All data will be lost. Exit► ◄ Start Press ◄ button to start format or press ► button to cancel format and back to the previous menu.
Timeshift Press button to start Timeshift,there will be a control bar as follows: [00:00:20] ( 0001:57:29) S Play FB FF 5 Five Prev. Next Pause Stop 14:28 Before Winter Comes The program will stop when you start timeshift, you can continue watching the program by press the PLAY button whenever youwant to watch it within the acquired timeshift time. You can press the button on the control bar or remote control to play 、fastback 、fastforward 、 play previous 、play next、pause or stop timeshifting.
EPG Menu Press EPG button in the Remote control. PROGRAMME GUIDE 31 May 2007 13:00-15:30 31 May 2007 14:38 Comdey drama starring David Niven .An officer in charge of a displaced persons’camp faces a dilemma when a Russian deserter is ordered back.(1969)[S] 31 May 1 Five 13:30-15:30 Before Winter Comes 2 Five Life 15:30-17:30 Battle of The V.1 3 Five US 17:30-18:00 Five News Followed By Weather Record Display Schedule Remild Move View Next Day Prev Day Enter Record Record programme.
8.DVD Operation Note : please ensure that the TV you have bought bought is with DVD loader, otherwise all this part does not apply. Basic Operation 1. Press Source button on the remote controller to select DVD input source. 2. Press OPEN / CLOSE button to load from into disc tray. Hold the disc without touching either or its surfaces, insert the DVD with the label toward the device’s back panel into the DVD slot on the right side of you TV set.
OSD Language This is used to select the OSD language. ·English ·French ·Spanish ·Portuguese ·Italian - - General Setup Page - ·Polish TV Display 16:9 OSD Lang ENG Screen Saver Last Memory On Off English French Spanish Portuguese Italian Polish Screen Saver Start the screen saver, the screen saver image will appear when the player stops or the picture is frozen for a few minutes. This saver can keep the screen from being damaged. ·On (Start the screen saver). ·Off (Remove the screen saver).
- - General Setup Page - TV Display 16: 9 OSD Lang ENG Screen Saver Last Memory On Off On Off Audio Setup · Speaker Setup In the “Audio Setup page” press “ ” button to select “Speaker Setup” item, press the “OK ENTER” or “ ” button (play) into the “Speaker Setup Page”. - - Audio Setup Page - Speaker Setup Dual Mono Dynamic Downmix · LT/RT A disc recorded multi channel soundtrack, the output signal will be incorporated to left and right channel.
Dual Mono This is used to select the Stereo, L-MONO, R-MONO and MIX-MONO. - - Audio Setup Page - Speaker Setup Dual Mono Dynamic Stereo L-Mono R-Mono Mix-Mono Dynamic This option is used to set the compression ratio in order to control the sound (Volume) contrast. - - Audio Setup Page - Speaker Setup Dual Mono Dynamic FULL 3/4 1/2 1/4 OFF Preference Setup You must sure no disc in the DVD then you can select Preference Page.
- - Preference Page - TV Type Audio Subtitle Disc Menu Parental Password Default Multi ENG ENG ENG PAL Multi NTSC Audio If a language listed below is recorded on the disc, you can play the sound in such language. If not, the language recorded will be used.
Disc Menu If a language listed below is record on the disc, you can set the Menu to be displayed in such language. If not, the language recorded will be used. ·English ·French ·Spanish ·Portuguese ·Italian ·Polish - - Preference Page - TV Type Audio Subtitle Disc Menu Parental Password Default Multi ENG ENG ENG English French Spanish Portuguese Italian Polish Parental When playing disc with parental lock function, you may select an Age Control Grade according to grade of disc and your own preference.
Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function. NOTE:(Default password is 123456 ) - - Preference Page - TV Type Audio Subtitle Disc Menu Parental Password Default Multi ENG ENG ENG Change Default User can load the original factory setting by choose RESET and press OK button.
9. TROUBLESHOOTING AND ADVICE Please check if you can solve the issue by yourself. Troubleshooting No signal No color shades Control Please check that all cables and cords are correctly plugged in. Adjust the contrast, the color and the brightness . Stain showing on the screen Maybe result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
