User guide

NT2 LAN NAS Configuration

Page 14

2 NAS Settings and User Interface

2.1 How to login

To configure your NT2 LAN, open your web browser, enter the IP address of your NT2 LAN and

then use the web interface for further configuration. To locate the network drive and find out its IP

address, we recommend using the discover tool for PC users and the NAS Builder for Mac users.

Default Login

User name: admin

Password: 123456

2.1.1 Local or Remote Login via Web Browser

The network drive can be accessed via web browser from the local network or remotely in the

office or on-the-road.

1. Open your web browser (e.g. IE, Firefox, Safari).

2. Go to

http://www.myakitio.com.

3. Select your preferred language and enter the name of your home server.

4. Your default home server name is the MAC address of your network drive. You can find

this number on a sticker either on the retail packaging or the device itself.

Note

To make it easier to remember the name of your home server, login using the web interface

and go to the Registration menu. There you can register the device under a new name.