User manual

ENGLISH
DECK2
MAIN FEATURES
NOTE ON USAGE
Allow for sufficientheat dispersion when installed on a rack.
- Handle the power cord carefully.
- Hold the plug when unplugging the cord.
- Keep the appliance free from moisture, water, and dust.
- Unplug the power cord when not using the appliance for long periods of time.
- Do not obstruct the ventilation holes. (For units with ventilation holes)
- Do not drop foreign objects into the unit.
- Do not let insecticides, benzene, and thinner come in contact with the set.
- Never disassemble or modify the set in any way.
COMPACT DISC
1. Precautions on handling compact discs
-Do not allow fingerprints, oil or dust to get on the surface of the disc.
- If the disc is dirty, wipe it off with a soft dry cloth.
-Do not use benzene, thinner, water, record spray, electrostatic-proof
chemicals, or silicone-treated cloths to clean discs.
-Always handle discs carefully to prevent damaging the surface; in
particular when removing a disc from its case or returning it.
-Do not bend the disc.
-Do not apply heat.
-Do not enlargethe hole in the center of the disc.
-Do not write on the label (printed side) with a hard-tipped implement
such as a pencil or ball point pen.
-Condensation will form if a disc is brought into a warm area from a
colder one, such as outdoors in winter.
-Do not attempt to dry the disc with a hair dryer, etc..
2. Precaution on storage
-After playing a disc, always unload it from the player.
-Always store the disc in the jewel case to protect from dirt or
damage.
- Do not place discs in the following areas:
(1)Areas exposed to directs sunlight for a considerable time.
(2)Areas subject to accumulation of dust or high humidity.
(3)Areas are affectedby heat from indoor heaters, etc..
PREPARATIONS
Check that the carton contains the following items:
(1) Main Unit 1pc
(2) Controller Unit 1pc
(3) Operating Instructions 1pc
(4) 8Pcable right angle 1pc
(5) 2PRCApath cord (L/R) 2pc
(6) Auto-Start cable 2pc
(7) AC power cord 1pc
(8) DB Builder CDRoom 1pc
Installing the Units
(1)Place your unit on a flat surface or mount it in a secure rack mount
case.
(2)Be sure the unit is mounted in a well-ventilated area where it will not
be exposed to direct sunlight, high temperatures, or high humidity.
(3)Try to place the unit as far as possible from TVs and tuners, as the unit
may cause undesirable interference.
CAUTION:
- The unit will work normally when the unit is mounted with the front
panel at within 15 degrees of the vertical plane. If the unit is tilted
excessively,discsmay not beloaded or unloadedproperly.
- The unit's LCD is designed to be clearly visible within the angles.
Mountthe unit sothatthe visualangleis withinthisrange.
CONNECTIONS:
(1) Turn off the POWER switch
(2) Connect the RCApath cord to the input on your mixer.
CAUTION:
- Be sure to use the supplied cables. Otherwise the unit may not work
properly.
- Be sure the power is off when connecting the control cords. Otherwise
it may result in damage.
- Auto Cue.
- MP3 Playback.
- Single / Continuous Playback.
- Anti-shock Playback.
- Fader Start Playback.
- Switching power supply.
- Pitch range: +/-4%, +/-8%, +/-16% and 100% (CDDA).
-Selectableelapsed,remainandtotalremaintimedisplay.
- Relay play allow consecutive playback during two decks.
- Frame Search.
- Seamless Loop.
- 4 fast search mode.
- Transport protection.
- +10 Track skip search
- Pitch Control & Pitch Display.
CDDA* Compact Disc Digital Audio
12