User manual

DECK2
GENERAL FUNCTIONS MAIN UNIT
1. DISCTRAY.This tray is used to load and unload a compact disc into the drive mechanism. The tray is opened and closed by pressing the OPEN/CLOSE
BUTTON.Never attempt to force the disc tray open or close when the power is turned off.
2. OPEN/CLOSE BUTTON(TransportTray Open/ Close).
This button is used to open and close the disc tray. NOTE: When a disc is loaded, the tray will not open unless the unit is in pause or cue mode.
3. USB 1 PORT.This is the USB 1 port where you insert your USB mass storage device for playing MP3 files.
4. POWER SWITCH.This switch is used to control the unit's main power.ALED directly above the power switch will glow to indicate main power is on.
5. POWER CONNECTOR.This is the main power connection. Only use the supplied power cord. Use of any other power may result in severe damages to
the unit.
6. USB 2 PORT.This is the USB 2 port where you insert your USB mass storage device for playing MP3 files.
7. CONTROLCONNECTOR.Connectthis connector to the control unit using the supplied mini-DIN8 cable.
8. AUDIO OUT R & L.These jacks send a left and right analog mono output signal. Use these jacks to send standard audio to a mixer or receiver. The red
colored jack represents the right channel output and white jack represents the left channels output.
GENERAL FUNCTIONS CONTROL UNIT
1. DISC TRAY OPEN/CLOSE BUTTON. This button is used to open and close the disc tray.
NOTE: When a disc is loaded, the tray will not open unless the unit is in pause or cue mode.
2. SOURCE SELECT BUTTON. This button lets you toggle between CD tray and USB Ports which music source device will play. The LEDs will
verify which source is activated. The function can only be selected under pause mode.
3. TIME BUTTON. The TIME button will switch the time value described in the time meter between track elapsed playing time, track remaining time,
and total remaining time of entire CD disc.
1234
567
8
1234 5 6 7
891018 17 16 15 14 13 12 11
1920
ENGLISH
13