User manual
GENERAL FUNCTIONS CONTROL UNIT
DECK2
16. PLAY/PAUSE BUTTON. Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play. While
in play mode the play LED will glow, and while in pause mode the play LED will flash.
17. CUE BUTTON. Pressing the CUE button during playback immediately pause playback and return the track to the last set cue point. The CUE BUTTON
LED will glow when the unit is in cue mode. The LED will also flash every time a new CUE POINT is set. The CUE button can also be held down to
momentarily play the music. When you release the CUE button it instantly returns to the last set CUE POINT. You can also tap the CUE button to create a
STUTTER EFFECT.
18. JOG MODE BUTTONS. The jog wheel has 2 effect functions as below:
VINYLMODE When wheel mode is set to VINYL, use the JOG WHEELto activate the scratch effect by touching the surface of JogWheel.
CDJ MODE When wheel mode is set to CDJ, scratch mode is exit, JOG WHEEL can be used to pitch bend during playback and be used to frame
search in pause mode.
19. CONTROLSTART SOCKET. These sockets are to connect to a mixer using a 3.5mm jack plug to give remote start capability.
20. CONTROLCONNECTOR. Connect this connector to the main unit using the supplied mini-DIN8 cable.
E
E
GENERAL FUNCTIONS LCD DISPLAY
1. CUE INDICATOR. This indicator will glow when the device is in CUE mode and will flash every time a new CUE POINTis set.
2. FOLDER INDICATOR. Indicates the number of the currently playing folder.
3. TIME BAR INDICATOR. Showseither time remaining or elapsed depending on the setting of the TIME BUTTON.This bar will begin to flash shortly
before the end of a track.The flashing bar is a great visual reminder a track is about to end regardless of which time mode the unit is.
4. BPM STATUS. This will indicate that theAUTO BPM counter is active.
5. BPM METER. Indicates the BPM value of the currently playing track.
6. PITCH METER. Indicates the percentage of a track's pitch.
7. KEYLOCK SYMBOL. Indicates if the key lock is activated (lock symbol).
8. LOOPINDICATOR. Indicates if LOOPfunction is activated.
9. RELOOPINDICATOR. Indicates that the LOOPis ready to be played again..
10.AUTOCUE STATUS. The indicator will flash when a LOOPis played and the indicator will disappear when a LOOPis inactivated.
11.KEYINDICATOR. Indicates when the touch sensitive wheel can be used to control playback or scratch effects.
12.TIME DISPLAY. Indicatesthe time of the chosen Time mode in minutes, seconds and frames.
13.MP3 INFORMATION INDICATOR. Indicates the current name of the track, of the folder and the sampling rate.
14.TIME MODE. Indicates the elapsed time of a track ("ELAPSED"), the remaining time of a track ("REMAIN") or the remaining time of entire
disc(TOTALREMAIN). Change between these modes with the Time button.
15.REPEATINDICATOR. Indicates whether the unit is in repeated play mode.
16.SINGLE INDICATOR. Indicates whether the play mode is set to single ("SINGLE") or continuous mode (no display).
17.TRACK INDICATOR. Indicates the number of the currently playing track.
18.PLAY/PAUSEINDICATOR. Indicates the device is in play mode ("►"), or the player is in pause mode (" ").׀׀
INTERNAL MENU
HoldTIME BUTTON for 3 seconds to enter the internal menu.
Turn TRACK KNOB to scroll through the differentmenus and press the TRACK KNOB to enter the corresponding submenu.
Turn TRACK KNOB to change the submenus and pressTIME BUTTON to memorize your settings in any operating mode and exit the menu.
1. Playlist Normal / Title/Artist /Album/ Genre
2. Sensitivity TouchWheel SensitivityAdjustment (Adjustment range is -20~+20.)
3. SleepTime No sleep, 5~120 min
15
1 2 318 17
16 15
13 10
14
567
89
4
12
11
ENGLISH