User manual

Quattro. User Manual

16

- Press SHIFT + lower RANGE button ( ) to activate/
deactivate Smart loop (
).
- Press the button labelled with a padlock (
) to lock/unlock
the pitch sliders on both decks so both will move together.
- Reset the tempo by pressing SHIFT + button lavelled with a
padlock (
).
6. JOGWHEEL
- Press SCRATCH button (
) to toggle the wheel mode
between CDJ and VINYL.
- Use the jogwheel to scratch or modify the pitch bend.
- Use SHIFT + jogwheel to search through the track.
- Under VIDEO mode (11) press SHIFT + turn jogwheel to
adjust the parameter of the effect.
7. TRANSPORT
- Press Play/Pause button to start/stop playback of deck.
- Press SHIFT + Play/Pause to activate/deactivate Smart play
(
).
- If song is paused, set a new cue point or if you are in the cue
point position, play track from the cue point by pressing the
CUE button and returns to cue point when released. If song is
playing, press CUE to pause the reproduction and jump to the
last cue point.
- Use SHIFT + CUE to activate/deactivate Smart Cue (
).
- Use the SYNC button to match the BPMs of different tracks.
- Press SHIFT + SYNC to set to master the deck in which it
has been pressed.
8. MIXER
- Adjust the deck volume by turning the gain knob.
- Tweak the sound using the 3-Band EQ.
- Turn the FILTER knob to apply a resonant filter. Turn right to
apply the high pass filter and left for the low-pass filter.
- Turn the MASTER knob to adjust the volume of the master
signal.
- Turn the BOOTH knob to adjust the volume of the booth
signal.
- Select the deck that must be pre-listened by pressing the
Monitor buttons (
).
- Press SHIFT + Monitor button (
) to select the “working
deck”. The beat of the working deck will be shown in front in
the display and shortcuts and actions with no specified deck
will affect this deck.
- Use the Linefader and Crossfader for mixing.
- Press L to assign the channel to the left of the crossfader.
- Press R to assign the channel to the right of the crossfader.
9. SHIFT
The Shift Button provides a second function to the controls.
10. BROWSER
- Under VIDEO mode (11) press SHIFT + LOAD A to perform
video transition to left deck appropriately (Press the button
twice to instantly transition).
- Under VIDEO mode (11) use SHIFT + LOAD B to perform
video transition to right deck appropriately (Press the button
twice to instantly transition).
- Under VIDEO mode (11) use SHIFT + LOAD C to move the
video crossfader automatically.
- Under VIDEO mode (11) press SHIFT + LOAD D to link or
unlink the video crossfader to the audio crossfader.
- Turn the encoder to scroll through the songs.
- Press SHIFT + turn the encoder to scroll through the folders
(focus change from songs to folders).
- Load the song to the active deck by pressing LOAD buttons.
- Holding LOAD A|B|C|D unloads song.
- Press the encoder to add the song to playlist, if focus is in
songs. If focus is in folders expand or collapse the folders.
- Press SHIFT + encoder to open or close the subfolders of the
selected folder when focus is on folders. If focus is in songs,
press it to zoom or unzoom the browser to be displayed on the
whole window.
11. VIDEO MODE
- Switch the mixer section between mixer and video by pushing
VIDEO MODE.
