User manual

Quattro. User Manual

18

Shift (Beatjump Back): Backward the playback.
- IN: Set the starting point of a loop.
Shift (Loop Move Back): Backward the loop. The moves will
be according to the loop size.
- OUT: Set the ending point of a loop.
Shift (Loop Move Forward): Forward the loop. The moves
will be according to the loop size.
- X2: Doubles the loop size.
Shift (Beatjump Forward): Forward the playback.
- KEYLOCK
( ): If on, you can change the tempo of the deck
keeping the original tone.
- SCRATCH (
): Scratch mode ON/OFF.
- JOG WHEEL: Turn the wheel to modify the tempo of the
song or to Scratch.
Shift (Seek): Turn to seek through the track quickly.
- SYNC: Match the BPM of the different tracks
Shift (MASTER): Set as master the TRACK DECK.
- CUE: Skip to the last set cue point.
Shift (LOOP ACTIVE): Active function enabled. This function
is enabled automatically when a loop has been established.
- PLAY/PAUSE: Start or stop the playback.
Shift (Skip): Skip to the beginning of the track.
4. REMIX DECK
- PITCH FADER: You can modify the REMIX DECK tempo.
- 1~4 BUTTONS This group of buttons allows you to activate
one or all the slots of the REMIX DECK. When a slot is active
the corresponding led is lit and you can modify or perform
functions such as Volume, Filter, Pitchbend, Play / Pause, Key
Lock, Sync or Unload. To activate a slot you have to press the
corresponding button, so that: The button 1 corresponds to the
1st slot, the button 2 to 2nd slot, and so on. To enable all the
slots, you have to press the button corresponding to the active
slot (lit button). In this case, you can see that the 4 buttons are
lit.
Shift (COPY FROM LOOP REC.): Copy the loop set in Loop
Recorder section.
- DECK: Switch between TRACK DECK (Deck A) and REMIX
DECK (Deck C). Led on means that we are controlling the
Deck C.
- /2: Halves the sample size of the active slot.
- IN: Reset function. Restore the default size of the active slot.
- OUT: Play Mode function. Switch the playback mode of the
active slot. The two modes of operation are: Single shoot or
Looped.
- X2: Doubles the sample size of the active slot.
- KEYLOCK
( ): If on, you can change the tempo of the deck
keeping the original tone.
- SCRATCH (
): Scratch mode ON/OFF.
- JOG WHEEL: Turn the wheel to modify the tempo of the
REMIX DECK or to Scratch.
- SYNC: Match the BPM of different tracks.
Shift (MASTER): Set as master the REMIX DECK.
- CUE: Skip to the last set cue point.
Shift (LOOP ACTIVE): Active function enabled. This function
is enabled automatically when a loop has been established.
- PLAY/PAUSE: Start or stop the REMIX DECK playback.
Shift (PLAY GROUP): Start the playback of all slots of the
REMIX DECK at the same time.
5. MIXER
- SHIFT: The Shift Button provides a second function to the
controls.
- MASTER: Turn this knob to adjust the volume of the master
signal.
- BOOTH: Turn this knob to adjust the volume of the booth
output.
- GAIN: You can modify the gain channel.
- Hi: You can modify the high frequencies of the channel.
- MID: You can modify the mid frequencies of the channel.
- LOW: You can modify the low frequencies of the channel.
Shift (KEY): Turn the knob to change the track tone.
- FILTER: You can modify the channel filter. Turn left to allow
low frequencies (LPF) or turn right to allow high frequencies
(HPF).
- MONITOR CUE (
): Select the channel that must be
monitored to the headphones output.
Shift (FILTER ON): Filter function ON/OFF.
- FX1 & FX2: Enable FX units on each deck.
Shift (FX SLOT): Enable FX units on each slot of the REMIX
DECK. Channel A & C buttons allow to enable DECK C, and
channel B & D buttons allow to enable DECK D.
- BROWSE: Turn the knob to scroll through the tracklist, and
press it to expand the tracklist.
Shift (TREE): Turn the knob to scroll through the folder list,
and press it to expand/collapse the folders.
- LOAD A-B: Load the selected track from the tracklist into the
TRACK DECK (Deck A/B).
- LOAD C-D: Load the selected sample/track from the tracklist
into the slot active (Deck C/D).
6. LOOP RECORDER
- LOOP RECORDER: This button works as modifier of this
area, so that, with the LOAD buttons (A, B, C y D) and
BROWSE knob you can control functions of the Loop Recorder
section.
- LOOP RECORDER + BROWSE (DRY/WET): Turn the knob
while holding LOOP RECORDER to adjust the proportion
between main signal and recorded signal.
- LOOP RECORDER + LOAD A (SIZE): Press this button
while holding LOOP RECORDER to change the loop size.
- LOOP RECORDER + LOAD B (DEL): Press this button while
holding LOOP RECORDER to delete the section loop.
- LOOP RECORDER + LOAD C (REC): Press this button while
holding LOOP RECORDER to start the recording.
- LOOP RECORDER + LOAD D (PLAY): Press this button
while holding LOOP RECORDER to start or stop the playback
of the loop.
