User manual

Quattro. User Manual

5

1.3. Rear panel
1. POWER
- Connect the device to your computer using the USB
connection.
- Connect the supplied power supply into DC IN for external
power supply.
- Use the POWER button to turn on/off the device.
2. OUTPUTS
- Connect an amplifier, active speakers or an external mixer to
the RCA outputs.
- Use the XLR connector when you will be driving an amplifier
or other audio equipment with a balanced input, or whenever
you will be running a signal line greater than 15 feet. Always,
use these jacks whenever possible.
3. INPUTS
- Connect any external source to the RCA inputs.
- Use LN/PH switches to select the input level depending on
the connected source.
- Be sure to connect turntable ground leads to either or both of
the two available ground terminals. This will reduce the
humming and popping noises associated with magnetic phono
cartridges.
- Turn the INPUT LEVEL knobs to modify the gain of the input.
